PT02H-14-5P Datasheet, PDF (53/80 Pages) Amphenol Corporation – Amphenol Miniature Cylindrical Connectors

PC
Contact
Size
20
16
Contact Specifications
Test
Current
Maximum
Millivolt
Drop†
Solder Well
Diameter
7.5
55
.046+–..000004
13.0
50
.078+.005
–.003
Solder
Well Depth
.125
+.031
–.000
.188 ^+.031
–.000
Service
Rating
I
II
Service Rating
Recommended
Operating
AC Voltage
at Sea Level
Test Voltage AC (RMS), 60 cps
Sea 50,000 70,000 110,000
Level ft.
ft.
ft.
600
1,500 500 375 200
1,000
2,300 750 500 200
† Silver plated wire per MIL-C-26482
PC Service Classes
PC connectors are available in the service classes
listed below. Each class except the hermetic seal
receptacle has one or more means of terminating or
supporting a cable or wire bundle.
“A”
General duty; back shell is threaded for con-
duit attachment of MS3057 cable clamp.
“A” (SR) General duty; with strain relief clamp for
cable or wire bundle support.
“C”
Pressurized receptacle; less than 1 cu. in.
per hour leakage at 30 psi over a tempera-
ture range of –65°F to +257°F in accor-
dance with BSC-C1P specification.
“E”
Environment resistant; with nut and grom-
met for moisture proofing individual wires.
“E” (SR) Environment resistant strain relief clamp and
grommet for moisture proofing individual
wires; provides added wire bundle support.
“P”
Translucent nylon boot for retaining cus-
tomer applied potting compounds; held in
place by a threaded ring.
“P” (SR) Strain relief clamp suitable for retaining cus-
tomer applied potting compounds, with pro-
vision for wire support.
“W”
Compressing clamp and neoprene gland for
moisture proofing multi-conductor jacketed
cables. Telescoping sleeves (MS 3420A)
can be used to adapt to cables smaller than
minimum close down.
“H”* Hermetically sealed with compression glass
inserts.
Refer to pages 57-60 for Hermetic Versions within the
PC solder series.
“A”
general duty
“E” (SR)
strain relief
“E” MS / “E”
open wire seal
“P”, MS / “P”
potting boot
“W”
cable seal
51