|
MS3116J14-18S Datasheet, PDF (51/80 Pages) Amphenol Corporation – Amphenol Miniature Cylindrical Connectors | |||
|
◁ |
PT-CE, SP-CE
how to order
PT-CE, SP-CE
To more easily illustrate ordering procedure, part number
PT00CE-20-41PW (SR) is shown as follows:
PT 00 CE â 20 â 41 P W (SR)
1 2 3 4 56 7
8
See code below:
1. Connector Type
âPTâ designates standard electrically conductive olive drab cadmium plated
bayonet lock connector with crimp contacts
âSPâ designates electrically non-conductive, hard anodic coated bayonet
lock connector with large flange and mounting holes for back panel mount-
ing, and crimp contacts.
2. Shell Style
â00â designates wall mounting receptacle
â01â designates cable connecting receptacle*
â02â designates box mounting receptacle
â06â designates straight plug
â07â designates jam nut receptacle
â08â designates 90° plug
3. Service Class
âCEâ designates environmental crimp
âCPâ designates potted type crimp
Both of the above are Amphenol ® proprietary versions of the MIL-C-
26482, Series 1 crimp contact connector and offer 7 lbs. contact retention
for size 20 contacts; 9 lbs for size 16 contacts.
4. Shell Size
â20â designates shell size. Shell sizes 6 through 24 available.
5. Insert Arrangement
Refer to pages 4-11 for insert availability.
â20 â 41â designates insert arrangement. (The number following the
hyphen is the number only that is used in the part number).
6. Contacts
âPâ designates pin contacts.
âSâ designates socket contacts.
7. Insert Rotation
Refer to page 7.
âWâ, âXâ, âYâ, âZâ designate that insert is rotated in its shell from the ânor-
malâ position. No letter required for normal (no rotation) position.
8. â(SR)â designates strain relief clamp.
Indicate optional finishes as follows:
(003) olive drab cadmium plate (standard on âPTâ)
(005) anodic coating - Alumilite® (standard on âSPâ)
(014) olive drab cadmium plate over nickel
(023) electroless nickel
(024) olive drab zinc cobalt plating
(025) non-conductive black zinc cobalt plating
(027) conductive black zinc cobalt plating
(424) electroless nickel finish with strain relief
(466) olive drab zinc cobalt plating with strain relief
(470) non-conductive black zinc cobalt plating with strain relief
(476) conductive black zinc cobalt with strain relief
* This connector style is sometimes referred to as a cable connecting âplugâ.
It does, however, mate with either a straight or 90 degree plug.
For ordering Miniature Breakaway PT-CE Crimp connectors see page 48.
49
|
▷ |