G17K-XX0X-2011-EU Datasheet, PDF (5/5 Pages) Amphenol Corporation – d-sub technical data

Amphenol
Amphenol East Asia Limited
Sheet 1 Of 1
PART NUMBER SYSTEM
PNS-17K Rev. D
D-subminiature
IDC Termination
Number of Position
09: 09 positions
15: 15 positions
25: 25 positions
37: 37 positions
50: 50 positions
:
Contact Style
0: Receptacle
1: Plug
Contact Finish
0: Flash gold
1: 15m² gold
2: 30m² gold
3: Full flash gold
Front Shell Finish
0: Zinc chromated
1: Tin over nickel
2: Nickel
3: Whole plastic type
G17K XX XX XXX XX
Variation Code
Blank: Standard
E: For E type
Strain Relief Option
0: None
1: With plastic strain relief
2: With steel strain relief
Flange Mounting Option
0: f3.05mm clear hole
1: #4-40 threaded hole
2: #4-40 threaded hole
with #4-40UNC screwlock
installed
3: #4-40 threaded hole
with #4-40UNC screwlock
bulk-packed
4: M3 threaded hole
5: M3 threaded hole with M3
screwlock installed
6: #4-40 threaded hole with
M2.6 screwlock bulk-packed
7: #4-40 threaded screwlock
clinched-mount installed
Bracket Options
0: Without insulator support
1: With insulator support
! All contacts are in 50m² nickel underplate
! All specified numbers are minimum thickness of plating.
! The variation code may supersede some major specifications defined by this standard part number
system
! For part number with a variation code. Please refer to the specific set of data sheets released for that
D NE-05266
C
NE-00020
B
NE-99182
A
SYM ECO NO.
PREPARED
Sondra sang
Henry Ko
Arthur Huang
Arthur Huang
Arthur Huang
APPROVED
08/30/2005
01/14/2000
06/07/1999
09/23/1997
DATE
DATE
08/30/2005
TITLE
G17K SERIES, PART NUMBER
PRODUCT SERIES
G17K
This document is the property of Amphenol Corporation and is delivered on the
express condition that it is not to be disclosed, reproduced or used, in whole or in
part, for manufacture or sale by anyone other than Amphenol Corporation without its
prior consent, and that no right is granted to disclose or to use any information in this
document.
CHECKED
Laura Su
DATE
08/30/2005
APPROVED
DATE
Ken Lin for 08/30/2005