|
97-4108B-28-21P621 Datasheet, PDF (43/44 Pages) Amphenol Corporation – Amphenol 97 Series Standard Cylindrical Connector | |||
|
◁ |
Additional Products
other MIL-5015 type connectors
from Amphenol
MS/Standard MIL-5015 Type Connectors
Amphenol has long been the accepted leader in providing MS/Standard
MIL-5015 type connectors. When a Mil-Spec 5015 connector is
required, these connectors provide well-proven electrical capability.
They are tested to strict adherence to military specifications, and they
are offered in a very broad range of product styles and options. Features
include:
⢠medium to heavy weight cylindrical with resilient inserts
⢠environmental resistant
⢠threaded couplings, single key/keyway shell polarization
⢠operating voltage to 3000 VAC (RMS) at sea level
⢠5 shell styles, 19 shell sizes, 280 contact arrangements
⢠solder or crimp contacts (non-rear-release type),
sizes 16â0 accepting 22â0 AWG
⢠coaxial or thermocouple contact options
⢠alternate insert positioning
⢠hermetic configurations available
⢠zinc alloy plating (cadmium-free) available
Within the MS/Standard family there are five mil-spec classes to meet
different requirements:
A â Solid Shell â for general, non-environmental applications.
C â Pressurized â for use on pressurized bulkheads or pressure barri-
Amphenol® MS/Standard MIL-5015 Connectors
ers; limits air leakage regardless of type and class of plug mated
with them.
E/F â Environmental Resisting with Strain Relief â designed for applications where the connector will be exposed to
moisture, vibration, and rapid changes in pressure and temperature.
R â Lightweight Environmental Resisting â shorter in length, lighter in weight than the E & F classes, the MS-R offers
a high degree of reliability under adverse conditions: recommended for new design applications.
See online (www.amphenol-industrial.com) or ask for Amphenol catalog 12-020 which gives detailed information on
this family of connectors.
Amphenol® Pre-Earth FMLB Connectors
Amphenol® Pre-Earth/First Mate Last Break Connectors are designed for
applications where a protective circuit from the ground contact to the shell
is a safety requirement. These connectors provide a path for any stray
voltage to be shunted to a safe ground avoiding harm to the operator and
the voltage sensitive equipment.
Features of Pre-Earth FMLB (DL Series) Connectors:
⢠MIL-5015 dimensions and performance where applicable.
⢠Conformity with European safety standards (DIN VDE 0627 and certi-
fied through TUV Product Service GMBH) in the approved insert
arrangement. Offered in shell styles: 3102A box mount, 3106A straight
plug, 3108A 90 degree plug.
⢠Intermateable with MS 5015 and 97 Series styles.
⢠Class IP67 protection in the mated condition.
⢠Main joint gasket between plug and receptacle shells provides
superior moisture sealing.
⢠Pre-earth (ground contact) design.
⢠First mate, last break capability.
⢠Standard plating is black zinc alloy. Green zinc plating is an option.
See online (www.amphenol-industrial.com) or ask for Amphenol Product
Data sheet #187 for detailed information on Pre-Earth FMLB Connectors.
Amphenol® Pre-Earth FMLB
Connectors
Pre-Earth (ground) contact
mates first and provides safety
from voltage outputs -
protects operators and sensi-
tive circuits.
41
|
▷ |