SP60 Datasheet, PDF (4/4 Pages) Amphenol Corporation – Ultra-stable Probe Thermistors

Ordering Information
The code number to be ordered may be specified as follows:
Code
Model Number
SP
60
SP
65
SP
85
SP
100
Code Probe Length

A
1/8 in (3.175 mm)

B
1/4 in (6.35 mm)

D
1/2 in (12.7 mm)
Code Material System Code

X
See table B for codes
Code Zero-power resistance @ 77°F (25°C)**
202 See Note 2
Code Tolerance*
F
1
G
2
J
5
K
10
L
15
M
20
N
25
P
30
Q
40
R
50
S
Non-standard (specify value)
Code Temperature Class Stability
A
221°F (105°C) maximum
B
392°F (200°C) maximum
C
572°F (300°C) maximum
Code Group (Resistance Change)
1 .02% per year
2 .05% per year
3 .075% per year
4 .1% per year
5 .2% per year
6 .5% per year
SP
____ - ____ - ____ - ____ - ____ - ____ - ____ Typical model number
*Special tolerances are available on request. Consult the factory for special resistance tolerances, non-standard resistances and/or non-
standard temperatures.
**The zero-power resistance at 77°F (25°C), expressed in ohms, is identified by a three digit code number. The first two digits represent
significant figures, and the last digit specifies the number of zeros to follow. Example: 2k Ohms =“202”. The standard resistance val-
ues are from the 24-Value series decade as specified in Military Standard MS90178. 1.0 / 1.1 / 1.2 / 1.3 / 1.5 / 1.6 / 1.8 / 2.0 / 2.2 / 2.4
/ 2.7 / 3.0 3.3 / 3.6 / 3.9 / 4.3 / 4.7 / 5.1 / 5.6 / 6.2 / 6.8 / 7.5 / 8.2 / 9.1
Amphenol
Advanced Sensors
www.amphenol-sensors.com
© 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice.
Other company names and product names used in this document are the registered trademarks or
trademarks of their respective owners.
AAS-920-248B - 12/2014