MS3116F-8-4S Datasheet, PDF (31/80 Pages) Amphenol Corporation – Amphenol Miniature Cylindrical Connectors

PT-SE. SP-SE, MS/PT-SE
Contact
Size
20
16
12
Contact Specifications
Test
Current
Maximum
Millivolt
Drop†
Crimp Well
Diameter
7.5
55
.049 ±.001
13.0
49
.067 ±.001
23.0
42
.100 ±.002
Minimum
Well Depth
.267
.236
.236
Service
Rating
I
II
Service Rating
Recommended
Operating
AC Voltage
at Sea Level
Test Voltage AC (RMS), 60 cps
Sea 50,000 70,000 110,000
Level ft.
ft.
ft.
600
1,500 500 375 200
1,000
2,300 750 500 200
† Silver plated wire per MIL-C-26482
PT-SE and SP-SE Service Classes
PT-SE and SP-SE connectors are available in the
three service classes listed below.
“SE”
Open wire sealing - environmental resistant,
with a nut and grommet for moisture proof-
ing individual wires
“SE” (SR)Strain relief clamp - environmental resistant
strain relief clamp and grommet for moisture
proofing individual wires; provides added
wire bundle support
“SP”
Translucent nylon boot for retaining cus-
tomer applied potting compounds; held in
place by a threaded ring
Breakaway style - see page 38.
MS/PT-SE Service Classes
MS-SE series connectors are available in the following
certified service classes:
“E”
Open wire sealing - environmental resisting
connectors are supplied with a multi-hole
grommet and clamping nut for moisture
proofing individual open wires
“F”
Environmental resistant strain relief clamp
and grommet for moisture proofing individual
wires; provides added wire bundle support
“P”
Potting applications - these connectors are
supplied with a translucent nylon boot for
retention of customer applied potting com-
pound
“SE”,
MS / “E”
open wire seal
“SE” (SR),
MS / “F”
strain relief
clamp
“SP”,
MS / “P”
potting boot
29