M39029-30-218 Datasheet, PDF (31/31 Pages) Amphenol Corporation – Amphenol /Matrix MS/Standard MIL-DTL-5015 Cylindrical Connectors

Additional MS/Standard Connectors
offered by Amphenol
MS/Standard 3100 Series, MIL-5015 Type Connectors
MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Con-
nectors with solder or crimp (non-rear release) contacts
Amphenol has long been the accepted leader in providing MS/Stan-
dard MIL-5015 type connectors. These connectors represent well-
proven electrical capability at an economical cost for most equipment
where durability is important.
The MS/Standard family of connectors (3100 Series) is a very broad
range of product with the following features:
• medium to heavy weight cylindrical with resilient inserts
• environmental resistant
• threaded couplings, single key/keyway shell polarization
• operating voltage to 3000 VAC (RMS) at sea level
• 5 shell styles, 19 shell sizes, 280 contact arrangements
• solder or crimp contacts (non-rear-release type),
sizes 16–0 accepting 22–0 AWG
• coaxial or thermocouple contact options
• alternate insert positioning
• hermetic configurations available
• zinc alloy plating (cadmium-free) available
The 3100 Series has five classes of connectors to meet different requirements. Within these connector styles, MIL-C-5015
has been replaced as follows: Environmental classes F and R are updated to and produced in strict accordance to MIL-DTL-
5015. Classes A, C and E are still produced, but are no longer listed on the qualified products listing (QPL).
Class designations and brief descriptions are as follows:
A – Solid Shell – for general, non-environmental applications.
C – Pressurized – for use on pressurized bulkheads or pressure barriers; limits air leakage regardless of type and class of
plug mated with them.
E/F – Environmental Resisting with Strain Relief – designed for applications where the connector will be exposed to mois-
ture, vibration, and rapid changes in pressure and temperature.
R – Lightweight Environmental Resisting – shorter in length, lighter in weight than the E & F classes, the MS-R offers a
high degree of reliability under adverse conditions: recommended for new design applications.
Ask for Amphenol catalog 12-020 which gives detailed information on this family of connectors.
MIL-5015 Modifications
In order to supplement standard MS shell styles and provide a greater variety of styles for the electrical connector user, there
are several MS and MS Modified cylindrical connectors offered by Amphenol. These types include flange mount plugs, thru
bulkhead receptacles, jam nut receptacles, connectors for potting and
connectors designed specifically to terminate jacketed cable.
Ask for Amphenol catalog 12-021 for detailed information.
97 Series, MIL-5015 Type Connectors
The low cost, general duty connector used extensively in the machine tool
industry, welding industry and numerous other industrial applications, is
the Amphenol^® 97 Series. Offered in non-environmental styles, these con-
nectors have hard dielectric inserts and threaded coupling. They are
Underwriters Laboratories Recognized and Canadian Standards Associa-
tion Certified.
Recent addition to this family is the 97E environmental styles, still an eco-
nomical choice. The 97E can be used in a variety of industrial applications
where environmental sealing is required, such as automotive and robotics.
Ask for Amphenol catalog 12-022 for detailed information.
97 Series, MIL-5015 Type Connectors
30