S6056C Datasheet, PDF (3/3 Pages) Amphenol Corporation – MUSBR Rugged USB

S6056C Rev 1.1
Product Numbering System
MUSBR - A 1 1 1 - 3 0
MUSBR
Connector series designation - Rugged USB
Style
A - Receptacle series A, single
Termination
1 - Right angle PCB tail
2 - Right angle PCB tail, on PCB with right angle cable header, note 1
3 - Right angle PCB tail, on PCB with matching USB termination, note 2
4 - Right angle PCB tail, on PCB with terminal block(s), note 3
5 - Vertical PCB tail
8 - Right angle PCB tail, on PCB with vertical cable header, note 4
A - Right angle PCB tail, on PCB for hand wiring
E - Right angle PCB, on PCB, with vertical USB termination, note 4
Number of Contacts
1 - Standard 4 per port
Colour
1 - Black - Standard
Options
0 - No rear shield; shell with Unified National thread, note 5 & 6
3 - With rear shield; shell with Unified National thread, note 5 & 6
4 - Low profile; with rear shield ;shell with Unified National thread, note 5&6
M - With rear shield; shell with Metric thread, note 5 & 7
N - No rear shield, shell with Metric thread, notes 5 & 7
R – Low profile; with rear shield; shell with Metric thread, note 5 & 7
Dust Cover Options
0 - Standard (no dust cover)
1 - With grey color dust cover (supplied bulk packed)
4 – Standard (no dust cover), note 8
5 - With black color dust cover (supplied bulk packed)
Unique Special Code
No Digit – Standard part defined by previous 10 digits
1 to 9 - Unique special feature. Note 9
Notes
1) Design of right angle cable header varies depending upon the style. Refer to drawing for details.
2) Matching USB is the same USB series as the rugged connector
3) Design of terminal blocks varies depending upon the style. Refer to drawing for details.
4) Vertical headers & vertical matching USB’s may not be readily available for all connector
styles.
5) Rear shield required for styles A, C & D with right angle PCB tails. Rear shield optional for
styles B & E with right angle PCB tails. No rear shield for any vertical PCB tail.
6) Use #4-40 UNC for styles A, C & D and #2-56 UNC for styles B & E
7) Metric thread - use M3 for styles A, C, & D and M2.5 for styles B & E
8) Dust cover option code 4 is identical to code 0 and may be used for
styles B & E only.
9) Many unique features are readily available to suit customer requirements.
Consult with Amphenol Canada for details.
Amphenol Canada Corp.
605 Milner Avenue
Toronto, Ontario, Canada, M1B 5X6
[phone]
Copyright © Amphenol Corporation 2012 • All rights reserved
Page 3 of 3
www.amphenolcanada.com
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.