NPC-100 Datasheet, PDF (3/4 Pages) List of Unclassifed Manufacturers – NovaSensor Disposable Medical Pressure Sensors

+In
Pinout
1 +In
2 +Out
3 -Out
4 -In
12 3 4
.069 in (1.75 mm)
0.000 in (0 mm)
+Out
-Out
-In
NPC-100 Series schematic diagram
1. Tolerance on electrical pad location is ±0.010 in (±0.25 mm).
2. Contact pads are suitable for soldering.
3. Split pads on +Out and –Out must be connected for proper operation.
4. All dimensions assume a nominal 0.01 in (0.25 mm) distance between the
edge of the solder pads to the edge of the ceramic. This distance will vary
slightly from part to part.
NPC-100 Series electrical interface
Ordering Information
The code number to be ordered may be specified as follows:
NPC-100
NPC-120
Code
T
Blank: Sold in 120-Up Snapstrate
Tape and reel
4.35 in (110.5 mm)
NPC-1 0 - ___
Typical model number
0 in (0 mm)
1. Sensors are shipped as 120 UP snapstrates that must be singulated by
the customer.
2. Each reel or plate may include units that have failed visual or electrical
parameters as well as good units. Bad units are identified with a dot on the
backside of the cell location.
3. Reels and plates are shipped in dust free anti-static containers to
prevent contamination of the gel surface.
NPC-100 Series shipping
Configuration