LMD-4022-36LJ Datasheet, PDF (3/12 Pages) Amphenol Corporation – Amphenol LMD and LMS Modular Connectors

LMD Modular Connectors
FEATURES, OPTIONS & CONTACT DATA
Amp_Ah_ee_ron_spo_acl_e
LMD Receptacle
Strain Reliefs
Optional Keying
Post (Six position
keying capability)
LMD Plug
Optional
Center
Jackscrew
Variety of Contacts
available. (accept #8
through #28 AWG wire)
Pin or Socket Modules
(may be intermixed in plug
or receptacle housings
Module
Sealed or unsealed, accept rear release #8, #16, #20
and #22 gauge contacts (See pages 103-105 for the
variety of module types available)
LMD Features and Options
LMD’s module options provide a mix of both active and
passive devices within one connector. The features and
options of this series describe the design flexibility in this
connector series:
• LMD Standard components are molded of a U/L rated
94VO flame retardant, light-weight thermoplastic material.
Alternate white nylon material (provides resistance to
industrial oils and solvents) is available; consult Amphenol
Aerospace for availability.
• The linear LMD connector may be used for rack and panel
or cable-to-cable applications.
• Plug and receptacle housings may be front or rear panel
mounted.
• Optional keying post provides six position keying
capability.
• The optional center jackscrew provides ease of mating
and unmating and insures high reliability under vibration.
• Cable strain reliefs are available for internal attachment.
(See page 107).
• Variety of module types. Sealed and unsealed modules
accept rear release #8, #16, #20 and #22 gauge contacts.
Bussing, diode and relay modules available. PC tail
contacts are also available; consult Amphenol Aerospace.
• A variety of contacts accept #8 through #28 AWG wire.
Commercially available automated crimp terminating
equipment may be used.
• Wired or unwired modules are rear inserted and held by
two retention tines. With the aid of a front release tool, the
modules are easily removed from the rear. (See pg. 107).
• Pin or socket modules may be intermixed in plug or
receptacle housings.
Contact Data
Contact
Size
Contact Resistance
Wire
Size ^{Test Current Max.}
(amperes) Millivolts
Dielectric
Withstand-
ing Voltage
AC (RMS)
Max.
Recommended
Working Voltage
AC (RMS)
22
22
28
5.0
1.5
73
54
1800
600
20
20
24
7.5
3.0
55
45
1800
600
16
16
20
13.0
7.5
49
46
2300
900
8*
12
14
23
17
42
40
2300
900
8
8
10
46
33
26
28
2300
900
Contact Wire
Size Size
28
22
26
24
22
24
20
22
20
20
16
18
16
8*
14
12
Contact Crimp
Tensile Strength
Lbs. Min.
3
5
8
12
8
12
20
20
30
50
70
110
8
10
8
150
220
* with #12 wire well
Max.
Wire Insulation
.054
.083
.103
.255
.255
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 101