000-46650-75 Datasheet, PDF (3/16 Pages) Amphenol Corporation – BNC Connectors

BNC
50 Ω BNC Specifications
Electrical
Impedance
50 Ω nominal
Frequency range
DC - 4 GHz (usable to 11 GHz)
VSWR
1.3 max. @ DC - 4 GHz (straight)
1.35 max. @ DC - 4 GHz (right-angle)
RF-leakage
55 dB minimum @ 3 GHz
Voltage rating (at sea level)
≥ 500 V peak (depending on cable)
Contact resistance
center contact: ≤ 1.5 mΩ
outer contact: ≤ 0.2 mΩ
braid to body: ≤ 0.1 mΩ
Insulation resistance
5,000 MΩ minimum
Insertion loss maximum
0.2 dB max. @ 3 GHz
Dielectric withstanding voltage
1,500 Vrms (at sea level)
Mechanical
Mating
Attachment method (inner / outer)
Coupling torque, min./max.
Coupling nut retention force
Center contact retention force
Braid/Jacket cable affixment
Center conductor cable affixment
Engagement force
Disengagement force
Durability (matings)
2-stud bayonet lock coupling (MIL-STD-348)
Crimp, clamp
0.6 / 2.5 in-lbs (7 / 28 N-cm)
101 lbs (450N) min.
≥ 6.1 lbs (27N)
Hex crimp or screw-threaded clamps
Crimp or solder
≤ 5 lbs (22N)
≥ 1.5 lbs (7N)
500 cycles minimum
Environmental
Temperature range
- copolymer of styrene:
Hermetic seals
Thermal shock
Moisture resistance
Corrosion
Vibration
Mechanical shock
Altitude
-65°C to +165°C
-55°C to +85°C
Helium leak test, 2 x 10^8 cc/sec.
MIL-STD-202, method 102, cond. D
MIL-STD-202, method 106
MIL-STD-202, method 101, cond. B
MIL-STD-202, method 204, cond. D
MIL-STD-202, method 202
MIL-STD-202, method 105, cond. C
Note: These characteristics are typical but may not apply to all connectors.
Amphenol^® RF: 800-627-7100
107
BNC