900001 Datasheet, PDF (23/24 Pages) Amphenol Corporation – MIL-DTL-38999 Series II Subminiature cylindrical connectors

Ordering information
Amphenol designation – Aluminium versions
Series
JT 07 RT 14 35 P
Shell type
00: Wall mounting receptacle (front panel)
PQ00: Wall mounting receptacle (back panel)
01: Line receptacle
02: Box mounting receptacle (front panel – RE version only)
P02: Box mouting receptacle (back panel – RE version only)
06: Straight plug
G06: Straight plug with grounding fingers
07: Jam nut receptacle
Service class and contact style
RT: Environmental, with accessory threads, crimp contacts
(Supplied without rear accessories)
RE: Environmental, crimp contacts
(Supplied with grommet and compression nut)
Except for box mounting receptacle (JT02-JTP02): non-environmental
CI: PCB contacts (add deviation F423 at the end of the P/N for socket contacts)
Shell size
8/10/12/14/16/18/20/22/24
Insert arrangement
See on pages 5 to 7
Contact type
P: Pin (connector delivered with contacts)
S: Socket (connector delivered with contacts)
A: Pin (connector delivered without contacts)
B: Socket (connector delivered without contacts)
Polarization
Blank for normal or A, B, C, D. See coding system on page 9
Shell finish
014: Olive drab cadmium plated
023: Electroless nickel plated
For other finishes, please consult us
Deviation
F423: PCB socket contacts
F404: Tinned PCB pin contacts
For other deviations (FXXX), please consult us
– 014 –
Amphenol designation – Hermetic receptacles
Series
JT 07
Y
14 35
P
–
Shell type
00: Wall mounting receptacle
02: Box mounting receptacle
07: Jam nut receptacle
I: Solder mounting receptacle
Service class and contact style
Y: Hermetic with interfacial seal, solder contacts
Shell size
8/10/12/14/16/18/20/22/24
Insert arrangement
See on pages 5 to 7 (arrangements marked with “Y”)
Contact type
23
P: Pin only
Polarization
Blank for normal or A, B, C, D. See coding system on page 9