JI-103C1R2 Datasheet, PDF (2/2 Pages) Amphenol Corporation – Waterproof to IP68

Type JI Specifications
Description
Chip thermistor housed in a tip, which is molded onto
flexible circular cable. Tip and outer cable insulation
material is thermoplastic elastomer. Tinned copper
conductors have individual polyolefin insulation.
Options
• Other resistance – temperature characteristics
• Other wire lengths
Data
• Temperature range: -40°F to 221°F (-40°C to 105°C)
• Insulation resistance: >100 MW at 500 VDC
• Wire conductors: 7 X 0.23 mm diameter (0.30 mm²)
• Resistance - temperature characteristics:
Refer to NK and DC95 data sheets
0.787 in (20 mm) Nominal
0.197 in (5 mm) Ø Maximum
0.138 in (3.5 mm) Ø Maximum
WL
NTC Type JI dimensions
Ordering Information
The code number to be ordered may be specified as follows:
Code Type
JI
Double Insulated With Insulated Wires
Code
Type
103C1R2 NK103C1R2 See NK or DC95 Data sheets
F103W DC95F103W
Code
Wire Length WL in mm
L301
300 ± 10
L501
500 ± 10
L751
750 ± 20
L102
1000 ± 20
L152
1500 ± 25
L202
2000 ± 25
L252
2500 ± 50
L302
3000 ± 50
L352
3500 ± 50
L402
4000 ± 50
L452
4500 ± 50
L502
5000 ± 50
JI - ____-____
Typical model number
Resistance characteristic and wire length are specified by the product code: e.g. JI103C1R2
orJIF103W
Other wire lengths are available for quantities > 5000 pieces as above with a wire tolerance
at > 3.28 ft (1 m) of +100 /- 0 mm (+3.9 in /- 0 in)
Amphenol
Advanced Sensors
www.amphenol-sensors.com
© 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice.
Other company names and product names used in this document are the registered trademarks or
trademarks of their respective owners.
AAS-920-350A-04/2014