P-MUSBR-AHD2-XX1XX Datasheet, PDF (1/3 Pages) Amphenol Corporation – TO ORDER CABLE TIES SEPARATELY

A
B
C
1
CABLE TIE
ASSEMBLY WITH
THUMB SCREW
SHOWN
SPLIT GROMMET
2
COVER PLATE
D
E
CUSTOMER
PANEL
BOOT
F
G
H
REVISIONS
REV
DESCRIPTION, ECN, EAR NO.
DATE
APP'D
D
PRODUCT DRAWING (EAR 14357)
E
PRODUCT DRAWING (EAR 14357)
MAR30/16 K.L.
JUN6/16
K.L.
1
MUSB, MUSBR, MRJ OR MRJR CONNECTOR
TO BE PURCHASED SEPARATELY. SEE NOTE 1.
BLIND/SEALED THREADED
HOLES RECOMMENDED
FOR CUSTOMER PANEL
RECEPTACLE CONNECTOR
PANEL SCREWS SUPPLIED
2
BY CUSTOMER
WASHER
(PRE-ASSEMBLED)
USB OR RJ PLUG WITH
OVER-MOULD SUPPLIED BY
CUSTOMER. SEE NOTE 1.
3
SCREW
(PRE-ASSEMBLED)
NOTES
1. THIS HOOD IS SUITABLE FOR USE WITH AMPHENOL RUGGED MODULAR JACKS & USB SERIES A RECEPTACLES - AMPHENOL
SERIES MRJ, MRJR, MUSB-A & MUSBR-A (STANDARD PROFILE).
3
2. KIT CONTAINS ONE BOOT, ONE COVER PLATE, UP TO TWO SPLIT GROMMETS, ONE CABLE TIE, TWO SCREWS & TWO WASHERS.
SCREWS & WASHERS ARE SUPPLIED PRE-ASSEMBLED TO THE COVER PLATE. SCREWS WILL FLOAT & BE CAPTURED BY THE
COVER PLATE TO MINIMIZE LOSS OF PARTS DURING USE.
3. THE HOOD CAN BE FIELD OR FACTORY ASSEMBLED OVER EXISTING STANDARD USB OR RJ PLUGS THAT ARE ALREADY
TERMINATED TO A CABLE. SEE DRAWING SHEET 3 FOR A SUGGESTED ASSEMBLY PROCEDURE. FOR IMPROVED SEALING
PERFORMANCE, THE USE OF A CABLE TIE GUN TO TIGHTEN THE CABLE TIE IS RECOMMENDED (EXAMPLE: PALADIN TOOLS CABLE
TIE GUN P/N 1828.1 WITH SETTING 1). THE ASSEMBLY PROCEDURE CAN BE ALTERED TO SUIT CUSTOMER PREFERENCES OR
REQUIREMENTS.
4
ORDERING CODE:
SERIES, RUGGED USB
MUSBR - AHD2 - X X1 XX
4. CUSTOMER PANEL REQUIRES TWO ADDITIONAL MOUNTING HOLES. THESE HOLES ARE RECOMMENDED TO BE BLIND/SEALED
HOLES SO THAT ENCLOSURE REMAINS SEALED. IN UNMATED CONDITION, RECEPTACLE MAINTAINS ENCLOSURE SEAL. IN MATED
CONDITION, BOOT ASSEMBLY ENSURES SEAL OF MATING INTERFACE AREA.
4
5. BOOT ACCORDION SECTION ALLOWS FLEXIBILITY FOR CABLE TIE LOCATION ALONG CABLE LENGTHWISE. THIS MAY BE
NECESSARY TO SUIT EXTRA LONG PLUG OVER-MOULDS OR TO AVOID FERRITES MOULDED INTO THE CABLE. IF A MATING
RECEPTACLE & PANEL ARE NOT AVAILABLE DURING BOOT ASSEMBLY, THE ACCORDION SECTION ALSO ALLOWS FLEXIBILITY FOR
THE BOOT FLANGE LOCATION.
HOOD, BOOT STYLE
6. FLEXIBILITY OF BOOT PERMITS PLUG/RECEPTACLE INTERFACE TO BE UNMATED & RE-MATED WITHOUT DIS-ASSEMBLY OR
SCREW, THREAD & BOOT OPTIONS
REMOVAL OF THE PLUG HOOD. THIS FEATURE SIMPLIFIES EQUIPMENT TEST & DIAGNOSTICS IN FIELD SERVICE APPLICATIONS.
2 = SCREW - #4-40 UNC THREAD, BLACK BOOT
3 = THUMB SCREW - #4-40 UNC THREAD, BLACK BOOT
7. MATERIAL: ALL MATERIALS ARE RoHS COMPLIANT PER EU DIRECTIVE 2011/65/EU & AMENDMENTS
7 = SCREW - #4-40 UNC THREAD, TRANSLUCENT BOOT
• BOOT: FLEXIBLE RUBBER, BLACK & TRANSLUCENT OPTIONS
8 = THUMB SCREW - #4-40 UNC THREAD, TRANSLUCENT BOOT
• COVER PLATE: THERMOPLASTIC POLYESTER OR NYLON, GLASS REINFORCED, BLACK
L = SCREW - M3 x 0.5 THREAD, BLACK BOOT
• HARDWARE: STAINLESS STEEL
M = THUMB SCREW - M3 x 0.5 THREAD, BLACK BOOT
• CABLE TIE: NYLON, BLACK
5
S = SCREW - M3 x 0.5 THREAD, TRANSLUCENT BOOT
• GROMMET: SILICONE RUBBER, BLACK
5
T = THUMB SCREW - M3 x 0.5 THREAD, TRANSLUCENT BOOT
8. GROMMET CODE 21 (4.50 [.177] I.D.) IS SUITABLE FOR CABLES UP TO 4.50 [.177] OUTSIDE JACKET DIAMETER. GROMMET CODE 31
GROMMET OPTION
01 = NO GROMMET
(6.40 [.252] I.D.) IS SUITABLE FOR CABLES BETWEEN 4.50 [.177] & 6.50 [.256] OUTSIDE JACKET DIAMETER. LARGER DIAMETER CABLES
DO NOT REQUIRE A GROMMET.
21 = 4.50 [.177] INSIDE DIAMETER GROMMET
31 = 6.40 [.252] INSIDE DIAMETER GROMMET
9. TO ORDER CABLE TIES SEPARATELY, SPECIFY P/N MUSBR-2AHD-501BP.
41 = WITH BOTH 4.50 [.177] & 6.40 [.252] GROMMETS
10. OPERATING TEMPERATURE -55 C TO +105 C.
PACKAGING OPTIONS
BP = BULK PACKED, COMPONENTS
BAGGED SEPARATELY IN CARTON
SK = SINGLE KIT, COMPONENTS FOR EACH
HOOD IN SINGLE BAG
6
STANDARD PART NUMBER - MUSBR-AHD2-241SK FOR STOCK IN DISTRIBUTION
CONSULT WITH AMPHENOL CANADA FOR OTHER OPTIONS OR SPECIAL REQUESTS.
UNLESS SPECIFIED OTHERWISE DRAWN
PRIMARY UNITS MILLIMETERS CHECKED
B.COPPING DEC5/14 _{Amphenol Canada Corp.}
K.LAMBIE DEC5/14
www.amphenolcanada.com
SECONDARY
INCHES M.E. APP'D
REFERENCE IN PARENTHESES Q.A. APP'D
GENERAL TOLERANCES
DWG APPR.
1 DECIMAL PLACE
ENG. REL. NO.
EAR 14327
MUSBR HOOD FOR USB OR RJ PLUG,
BOOT STYLE DESIGN, FOR SEALING
6
MATING INTERFACE, RoHS COMPLIANT
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR
ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.
2 DECIMAL PLACES
3 DECIMAL PLACES
ANGULAR DEGREES
REF.
THIRD
ANGLE
PROJECTION
DWG. NO.
REV
DO NOT
P-MUSBR-AHD2-XX1XX
E
SCALE
DRAWING CODE ID NO. 03554 DWG SIZE: X SCALE: 2:1 SHEET 1 OF 3
A
B
C
D
E
F
G
H