P-MRJ-5D80-X1 Datasheet, PDF (1/2 Pages) Amphenol Corporation – d-sub technical data

A
1
4.50
.177
2
9.00
.354
3
B
C
D
E
F
5.50 [2.17] DEEP THREADED HOLES.
SEE ORDERING CODE THREAD OPTION.
8.90
.350
24.00
.945
19.75
.777
REF
18.00±0.25 14.00
.709±.010 .551
38.70
1.524
REF.
2.50
.098
DATE CODE
INK MARKING
16.70±0.40
.657±.016
3.05±0.50
.120±.020
G
REVISIONS
REV
DESCRIPTION, ECN, EAR NO.
A
PRODUCT DRAWING (EAR 13240)
B
PRODUCT DRAWING (EAR 14166)
H
DATE
MAR13/08
APR23/13
APP'D
K.L.
K.L.
1
ORDERING CODE: M R J - 5 D 8 0 - X 1
SERIES, RUGGED RJ
RECEPTACLE, 8 CONTACTS
RIGHT ANGLE, ON PCB
WITH 2 x 5 VERTICAL HEADER
LED OPTION:
0 = NONE
MOUNTING HOLE THREAD OPTION:
2
0 = #4-40 UNC THREAD
M = M3 X 0.5 THREAD
SINGLE PORT
SPECIAL CONNECTORS
MANY UNIQUE FEATURES ARE READILY
AVAILABLE TO SUIT CUSTOMER
REQUIREMENTS. CONSULT WITH
AMPHENOL CANADA FOR DETAILS.
3
30.30±0.25
1.193±.010
16.00
.630
4
8.50
.335
29.75±1.00
5
1.171±.039
NOTES:
1. MATERIAL:
ALL MATERIALS ARE RoHS COMPLIANT PER EU DIRECTIVE 2011/65/EU AND AMENDMENTS
• SHELL - DIECAST ZINC ALLOY, NICKEL PLATED
• CONTACTS - PHOSPHOR BRONZE WITH 1.27 µm [50 µ"] GOLD OVER 1.27 µm [50 µ"] MINIMUM
NICKEL ON THE MATING AREA AND MATTE TIN OVER NICKEL ON THE CONTACT TAILS.
• INSERTS - ENGINEERING THERMOPLASTIC, FLAMMABILITY RATING UL94V-0
REAR INSERTS: BLACK NYLON, FRONT INSERT: CLEAR POLYCARBONATE
• GASKET - SILICONE RUBBER
• PCB - FR-4 FIBERGLASS, LEAD FREE
4
• HEADER - SAMTEC IPL1 SERIES OR EQUIVALENT. VERTICAL 2 x 5, BLACK THERMOPLASTIC
HOUSING, COPPER ALLOY CONTACTS WITH GOLD FLASH ON MATING AREA AND TIN PLATED
TAILS
2. ENVIRONMENTAL PERFORMANCE PER IEC 60529 CODE IP67 FOR SEAL BETWEEN MATING AREA
AND PCB SIDE OF CONNECTOR. GASKET PROVIDES SEAL TO INSIDE FACE OF PANEL.
3. CURRENT RATING: 1.5 AMPERES.
4. CONTACT RESISTANCE: 80 MILLIOHMS MAXIMUM (SUBJECT TO VERIFICATION).
5. OPERATING TEMPERATURE: -40°C TO +105°C.
5
6. AVAILABLE MATING AREA COVERS PROVIDE ADDED PROTECTION. CONSULT WITH AMPHENOL
CANADA FOR DETAILS.
7. RECOMMENDED TORQUE FOR PANEL MOUNT SCREWS: 0.45 TO 0.65 Nm [4.0 TO 5.75 IN-LBS] FOR
STEEL SCREWS WITH 3.00 [.118] MINIMUM THREAD ENGAGEMENT.
8. CUSTOMER TO VERIFY THAT ALL PROCESS CLEANERS ARE COMPATIBLE WITH
POLYCARBONATE MATERIAL.
UNLESS SPECIFIED OTHERWISE DRAWN
PRIMARY UNITS MILLIMETERS CHECKED
G.LI MAR13/08 Amphenol Canada Corp.
www.amphenolcanada.com
17.53±0.50
6
.690±.020
SECONDARY
INCHES M.E. APP'D
MRJ SERIES RUGGED MODULAR JACK,
REFERENCE IN PARENTHESES Q.A. APP'D
8 POSITION, RIGHT ANGLE, ON PCB,
6
GENERAL TOLERANCES
DWG APPR. K.LAMBIE MAR26/08
WITH 2 x 5 VERTICAL HEADER,
1 DECIMAL PLACE
ENG. REL. NO.
EAR 13240
RoHS COMPLIANT
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR
ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.
2 DECIMAL PLACES
3 DECIMAL PLACES
ANGULAR DEGREES
0.15
REF.
THIRD
ANGLE
PROJECTION
DWG. NO.
DO NOT
P-MRJ-5D80-X1
SCALE
DRAWING CODE ID NO. 03554 DWG SIZE: X SCALE: 3:1
REV
B
SHEET 1 OF 2
A
B
C
D
E
F
G
H