P-MRJ-59XX-X1 Datasheet, PDF (1/2 Pages) Amphenol Corporation – d-sub technical data

8
F
9.00
.354
E
LEFT LED
SEE ORDERING
CODE
D
C
B
41.32±1.00
1.627±.039
A
8
7
6
5
5.50 [.217] DEEP THREADED
HOLES SEE ORDERING CODE
THREAD OPTION
18.00
.709
24.00
.945
4.50
.177
RIGHT LED
8.90
.350
14.00
.551
2.38±0.50
.094±.020
4
50.22
1.977
REF
2.50
.098
DATE CODE
INK MARKING
3
M1.6
CAPTIVE
SCREW
2
1
REVISIONS
REV
ECN, ERN NO.
DATE
A PRODUCT DWG (EAR 13226) FEB21/08
APPRD.
K.L.
F
10 POSITION
OR 8 POSITION
WITH LED'S
2.54
.100
TYP.
E
TERMINAL BLOCK CLAMP
ACCEPTS 16-30 AWG
WIRE
8 POSITION
WITHOUT LED'S
30.30
1.193
16.00
.630
19.05±0.50
.750±.020
7
D
ORDERING CODE: M R J - 5 9 X X - X 1
SERIES, RUGGED RJ
8.50
.335
RECEPTACLE, RIGHT ANGLE,
ON PCB WITH TERMINAL
BLOCKS
NUMBER OF CONTACTS
8= 8 CONTACTS
A=10 CONTACTS
LED OPTION
0=NONE
1=GREEN LEFT, YELLOW RIGHT
4=YELLOW LEFT, GREEN RIGHT
5=GREEN LEFT, GREEN RIGHT
MOUNTING HOLE THREAD
OPTION
0= #4-40 UNC THREAD
M= M3 x 0.5 THREAD
SINGLE PORT
NOTES:
1. MATERIAL:
ALL MATERIALS ARE RoHS COMPLIANT PER EU DIRECTIVE 2002/95/EC AND
AMENDMENTS
• SHELL - DIECAST ZINC, NICKEL PLATED
• CONTACTS - PHOSPHOR BRONZE WITH 50 MICROINCHES (1.27 MICRONS)
GOLD OVER 50 MICROINCHES (1.27 MICRONS) MINIMUM NICKEL ON THE
MATING AREA AND MATTE TIN OVER NICKEL ON THE CONTACT TAILS.
• INSERTS - ENGINEERING THERMOPLASTIC, UL FLAMMABILITY RATING 94V-0,
REAR INSERTS: BLACK, FRONT INSERT: CLEAR
• LED’S - EPOXY LENS, STEEL TAILS WITH TIN PLATING
C
• GASKET - SILICONE RUBBER
• PCB - FR-4 FIBERGLASS, LEAD FREE
• TERMINAL BLOCKS - ENGINEERING THERMOPLASTIC HOUSING (UL94V-0,
GREEN) WITH COPPER ALLOY, NICKEL PLATED CLAMPS & SCREWS AND
COPPER ALLOY, TIN PLATED TERMINALS.
2. ENVIRONMENTAL PERFORMANCE PER IEC 60529 CODE IP67 FOR SEAL BETWEEN
MATING AREA AND PCB SIDE OF CONNECTOR. GASKET PROVIDES FOR SEAL TO
INSIDE FACE OF PANEL.
3. CURRENT RATING: 1.5 AMPERES.
4. CONTACT RESISTANCE: 50 MILLIOHMS.
B
5. OPERATING TEMPERATURE: -40C TO +105C.
6. AVAILABLE MATING AREA COVERS PROVIDE ADDED PROTECTION. CONSULT WITH
AMPHENOL CANADA FOR DETAILS.
7. RECOMMENDED TORQUE FOR PANEL MOUNT SCREWS:
0.45 TO 0.65 Nm (4.00 - 5.75 IN-LBS) FOR STEEL SCREWS WITH 3.00 (.118) THREAD
ENGAGEMENT.
PROPRIETARY AND CONFIDENTIAL
THIS DOCUMENT CONTAINS
PROPRIETARY INFORMATION AND SUCH
INFORMATION MAY NOT BE DISCLOSED
TO OTHERS FOR ANY PURPOSE OR USED
FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM
AMPHENOL CANADA CORP.
NEXT ASSY
USED ON
APPLICATION
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
DRAWN
DESIGNED
CHECKED
G.LI
DATE _{Amphenol Canada Corp.}
FEB21/08
MRJ SERIES RUGGED MODULAR
JACK, 8 & 10 POSITION RIGHT A
THREE PLACE DECIMAL
I. E. APPRD.
ANGLE, ON PCB WITH TERMINAL
INTERPRET GEOMETRIC
Q. A. APPRD.
BLOCKS, RoHS COMPLIANT
TOLERANCING PER:
MATERIAL
FINISH
DWG. APPRD. K.LAMBIE FEB21/08
ENG. REL. NO. EAR 13226
REF.
SIZE DWG. NO.
REV
C ^{P-MRJ-59XX-X1} A
DIMENSIONS ARE IN CODE ID. NO.
DO NOT SCALE DRAWING
MILLIMETERS
SCALE: 3:1 WEIGHT:
SHEET 1 OF 2
6
5
4
3
2
1