FP07 Datasheet, PDF (1/2 Pages) Amphenol Corporation – Thermometrics Fastip

NTC
Type FP07
Thermometrics Fastip
Probe Thermistor
The NTC Type FP Series Fastip Thermoprobes
consist of small diameter glass-coated thermistor
beads hermetically sealed at the tips of shock
resistant glass rods. The small bead thermistor has
a very thin glass coating which allows for relatively
flat frequency response for flow applications. As
much of the bead as possible is exposed at the tip
of the glass rod to provide the fastest response
times. The units are rugged and unaffected by
severe environmental exposures, including high
density nuclear radiation.
The NTC Type FP Series Fastip Thermoprobes are
ideally suited for high speed measurement and
control of fluid temperatures, fluid level or flow.
They offer the ease of handling associated with
large glass probe thermistors as well as ultra-
fast response times of small glass coated bead
thermistors. These units exhibit relatively flat
response to flow input from 200 Hz to 1000 Hz.
Features
• Ultra-Fast Response Time
• Rugged, Unaffected by Severe Environmental
Exposures
• Relatively Flat Frequency Response
• Ease of Handling
Applications
• Sub-Sea Monitoring
• High Speed Fluid Temperature Measurement &
Control
• Industrial
Amphenol
Advanced Sensors