|
ER22BB11 Datasheet, PDF (1/2 Pages) Amphenol Corporation – The markets and application for the ePower series include but are not limited to the following found in both the Military Aerospace and Industrial segments | |||
|
IDS-34-1
Amphenol ®
ePower Connectors
The ePower series of connectors are designed for the
demanding requirements of hybrid, electric vehicles, and
utility truck electrical systems, operating at 800vdc to
1000vdc with a 200A to 500A rating. The product
incorporates the patented RADSOK® technology for higher
amperage, lower T-rise, less resistance and mating force.
Meantime, it offers a 40% smaller footprint than three EMI
shielding cable glands and easier operation of termination
with shielded cable by a washer compressing the shield to
the inside surface of the shell. The connector series covers 2
or 3 power contacts. As an example, one ePower 400A
connector can replace three conventional connectors, saving
space and cost.
Features:
⢠Two or three circuit power
⢠Crimp, lug or bus bar termination
⢠IP2X on pin and socket
⢠Environmental IP67 rating
⢠Two HVIL circuits
⢠1,000vdc rating
⢠5.7mm - 14mm RADSOK® technology for 200 to 500A
current capability
⢠Strain relief for jacketed cable incorporated into shell
⢠Integrated EMI shielding
⢠Excellent vibration resistance
⢠All aluminum shell
www.amphenol-industrial.com
|
▷ |