CSP60BA252M Datasheet, PDF (1/2 Pages) Amphenol Corporation – Thermometrics Laboratory NTC Temperature Standards

Type CSP
Thermometrics
Laboratory NTC
Temperature
Standards
The Type CSP Temperature Standards are
ultrastable probe thermistors which have been
calibrated to an accuracy of 0.01°C. The standard
unit has a thin, conformal coating of silicone
rubber over the entire unit; this makes it suitable
for immersion in a water bath. They are also
available with stainless steel sensor housings, or
they can be encapsulated into various sheaths.
See assemblies depicted in the figure.
Applications
All units can be supplied with calibrations over
different temperature ranges, with longer leads;
and with various coatings.
Data
Two types of CSP Thermoprobes are stocked for
quick delivery:
• The CSP60BA252M, with a nominal resistance
of 2500 ohms @25°C, is furnishedwith
calibration over the range of 0° to 50°C.
• The CSP60BT103M has a nominal resistance
of 10K ohms @25°C and is furnished with
calibration over the range of 0° to 100°C.
The calibration table normally furnished with
the CSP60BA252M provides data every 0.25°C
between 0° and 50°C. The table furnished with
the CSP60BT103M provides data every 0.5°C over
the range of 0° to 100°C. Both units are furnished
with interpolation equations which are accurate
to 0.01°C. Tables with calibration data furnished
every 0.01, 0.05 or 0.1°C are also available.
Amphenol
Advanced Sensors