LP62S16512-T_15 Datasheet, PDF (5/13 Pages) AMIC Technology – 512K X 16 BIT LOW VOLTAGE CMOS SRAM

Absolute Maximum Ratings*
VCC to GND .............................................. -0.5V to +4.0V
IN, IN/OUT Volt to GND................... -0.5V to VCC + 0.5V
Operating Temperature, Topr ...................-25°C to +85°C
Storage Temperature, Tstg.....................-55°C to +125°C
Power Dissipation, PT....................................................................... 0.7W
LP62S16512-T Series
*Comments
Stresses above those listed under "Absolute Maximum
Ratings" may cause permanent damage to this device.
These are stress ratings only. Functional operation of this
device at these or any other conditions above those
indicated in the operational sections of this specification is
not implied or intended. Exposure to the absolute
maximum rating conditions for extended periods may affect
device reliability.
DC Electrical Characteristics (TA = -25°C to + 85°C, VCC = 2.7V to 3.6V, GND = 0V)
Symbol
Parameter
LP62S16512-55/70LLT
Unit
Min.
Max.
Conditions
⏐ILI⏐ Input Leakage Current
-
1
µA VIN = GND to VCC
⏐ILO⏐ _{Output Leakage Current}
-
Active Power Supply
ICC
Current
-
CS1 = VIH or CS2 = VIL or
1
µA ^{LB = HB = VIH}
VI/O = GND to VCC
CS1 = VIL , CS2 = VIH ,
5
mA
LB = VIL or HB = VIL , II/O = 0mA
ICC1
Dynamic Operating
Current
ICC2
ISB
Standby Current
ISB1
VOL Output Low Voltage
VOH Output High Voltage
Min. Cycle, Duty = 100%, CS1 = VIL ,
-
50
mA
CS2 = VIH , LB = VIL or HB = VIL
II/O = 0mA
CS1 ≤ 0.2V, CS2 ≥ VCC-0.2V ,
-
8
mA _{LB ≤ 0.2V or HB ≤ 0.2V}
f = 1MHz , II/O = 0mA
-
1
mA ^{CS1 = VIH or CS2 = VIL or}
LB = HB = VIH
CS1 ≥ VCC - 0.2V or CS2 ≤ 0.2V or
-
20
µA _{LB = HB ≥ VCC-0.2V}
VIN ≥ VCC-0.2V or VIN ≤ 0.2V
-
0.4
V IOL = 2.1 mA
2.2
-
V IOH = -1.0 mA
(August, 2004, Version 1.3)
4
AMIC Technology, Corp.