A29040A Datasheet, PDF (16/30 Pages) AMIC Technology – 512K X 8 Bit CMOS 5.0 Volt-only, Uniform Sector Flash Memory

A29040A Series
DC Characteristics
TTL/NMOS Compatible
Parameter
Symbol
Parameter Description
ILI
Input Load Current
ILIT
A9 Input Load Current
ILO
Output Leakage Current
ICC1 VCC Active Read Current
(Notes 1, 2)
ICC2 ^{VCC Active Write (Program/Erase)}
Current (Notes 2, 3, 4)
ICC3 VCC Standby Current (Note 2)
VIL
Input Low Level
VIH
Input High Level
VID
Voltage for Autoselect
and Sector Protect
VOL Output Low Voltage
VOH Output High Voltage
Test Description
VIN = VSS to VCC. VCC = VCC Max
VCC = VCC Max, A9 = 12.5V
VOUT = VSS to VCC. VCC = VCC Max
CE = VIL, OE = VIH
CE = VIL, OE =VIH
CE = VIH
VCC = 5.25 V
IOL = 12mA, VCC = VCC Min
IOH = -2.5 mA, VCC = VCC Min
Min.
-0.5
2.0
10.5
2.4
Typ. Max. Unit
±1.0 µA
100 µA
±1.0 µA
20 30 mA
30 40 mA
0.4 1.0 mA
0.8
V
VCC+0.5 V
12.5 V
0.45 V
V
CMOS Compatible
Parameter
Symbol
Parameter Description
ILI
Input Load Current
ILIT A9 Input Load Current
ILO Output Leakage Current
ICC1 ^{VCC Active Read Current}
(Notes 1,2)
ICC2 ^{VCC Active Program/Erase Current}
(Notes 2,3,4)
ICC3 VCC Standby Current (Notes 2, 5)
VIL
VIH
VID
VOL
VOH1
VOH2
Input Low Level
Input High Level
Voltage for Autoselect and Sector
Protect
Output Low Voltage
Output High Voltage
Test Description
VIN = VSS to VCC, VCC = VCC Max
VCC = VCC Max, A9 = 12.5V
VOUT = VSS to VCC, VCC = VCC Max
CE = VIL, OE = VIH
CE = VIL, OE = VIH
CE = VCC ± 0.5 V
VCC = 5.25 V
IOL = 12.0 mA, VCC = VCC Min
IOH = -2.5 mA, VCC = VCC Min
IOH = -100 µA. VCC = VCC Min
Min.
Typ. Max. Unit
±1.0 µA
100 µA
±1.0 µA
20 30 mA
30 40 mA
-0.5
0.7 x VCC
1
5
µA
0.8
V
VCC+0.3 V
10.5
12.5 V
0.85 x VCC
VCC-0.4
0.45 V
V
V
Notes for DC characteristics (both tables):
1. The ICC current listed includes both the DC operation current and the frequency dependent component (at 6 MHz).
The frequency component typically is less than 2 mA/MHz, with OE at VIH.
2. Maximum ICC specifications are tested with VCC = VCC max.
3. ICC active while Embedded Algorithm (program or erase) is in progress.
4. Not 100% tested.
5. For CMOS mode only, ICC3 = 20µA max at extended temperatures (> +85°C)
PRELIMINARY (August, 2001, Version 0.1)
16
AMIC Technology, Inc.