A25L016M-F Datasheet, PDF (1/43 Pages) AMIC Technology – 16Mbit Low Voltage, Serial Flash Memory With 100MHz Uniform 4KB Sectors

A25L016 Series
16Mbit Low Voltage, Serial Flash Memory
With 100MHz Uniform 4KB Sectors
Document Title
16Mbit, Low Voltage, Serial Flash Memory With 100MHz Uniform 4KB Sectors
Revision History
Rev. No.
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
History
Initial issue
Add the spec. of ICC3 for 100MHz
Modify the ICC1 and ICC2 to 25μA
Modify the ICC7 to 25mA
Modify the tPP to 3ms
Modify the tSE to 0.2s
Modify the Sector Erase Time to 0.2s (typical)
Modify the Page Program Time to 2ms (typical)
Modify the Active Read Current to 35mA (Max.)
Modify the Program/Erase Current to 25mA (Max.)
Modify the Standby Current to 25μA (Max.)
Modify Block Erase Cycle Time to 1.3s (Max.)
Modify Chip Erase Cycle Time to 40s (Max.)
Add packing description in Part Numbering Scheme
P30: Change Data Retention and Endurance value from Max.
to Min.
Add 8-pin WSON (6*5mm) package type
Change tW, tSE, tBE and tCE values
P1: Add “Provide 64Bytes Security ID (application note is available
by request)” in Features
Add 8-pin SOP (150mil) package type
Change tSE(typ.) from 0.15s to 0.08s
Change tSE(max.) from 0.28s to 0.2s
Change tBE(typ,) from 0.7s to 0.5s
P31: Change ICC6(max.) from 15mA to 25mA
Issue Date
April 2, 2008
December 26, 2008
April 9, 2009
April 23, 2010
October 27, 2010
December 21, 2010
August 19, 2011
September 20, 2011
October 11, 2011
November 15, 2011
March 29, 2012
Remark
Final
(March, 2012, Version 2.0)
AMIC Technology Corp.