AMIS-710208 Datasheet, PDF (4/8 Pages) AMI SEMICONDUCTOR – 200dpi CIS Module

AMIS-710208-A7: 200dpi CIS Module
Data Sheet
5.0 Absolute Maximum Ratings
Table 2 lists the module’s absolute maximum ratings.
Table 2: Maximum Ratings
Parameter
Power supply
Input clock pulse, high level
Input clock pulse, low level
Symbols
Vdd
Idd
Vn
In
VLED
ILED
Vih
Vil
Max. Rating
7
50
-10
30
5.5
400
Vdd – 0.5
-0.8
Units
V
mA
V
mA
V
mA
V
V
6.0 Recommended Operating Environment
Table 3 lists the module’s recommended operating environment.
Table 3: Recommended Operating Environment
Parameter
Symbol
Range
Operating temperature
Top
0 to 50
Operating humidity
Hop
10 to 85
Storage temperature
Tstg
-25 to+75
Storage humidity
Hstg
5 to 95
Units
°_C
%
°_C
%
7.0 Electro-Optical Characteristics
Table 4 lists the electro-optical characteristics at 25°C
Table 4: Electro-Optical Characteristics at 25°C
Parameter
Symbol
Parameter
Units
Comments
Number of photo pixels
704
Pixel-to-pixel spacing
Photo-response non-uniformity ⁽¹⁾
Adjacent pixel non-uniformity ⁽²⁾
Dark non-uniformity ⁽³⁾
Dark output voltage ⁽⁴⁾
Modulation transfer function ⁽⁵⁾
125
µm
Up
<+/-30
%
Uadj
<25
%
Ud
<100
mV
Vd
200<Vd<300
mV
MTF
>50
%
Notes:
1. Up = [(Vpmax-Vpavg) / Vpavg] x100% or [(Vpavg-Vpmin) / Vpavg] whichever is the largest. Where Vpmax is the maximum pixel value and Vpmin is the minimum
pixel value in a single scan line.
2. Upadj = MAX[|(Vp(n)-Vp(n+1))| / vp(n)].
3. Ud=Vdmax-Vdmin; where Vdmax is the maximum pixel value and Vdmin is the minimum pixel value in the dark.
4. Vd is the average dark level.
5. MTF=[(Vpmax-Vpmin) / (Vpmax+Vpmin)] x 100%. Depth of focus, DOF, is defined with the MTF. It is measured with the glass surface as the reference. Vpmax is
the maximum output voltage at 100lp/inch, (At ½ of Nyquest Frequency). Vpmin is the minimum output voltage at 100lp/inch.
AMI Semiconductor – Jan. 06, M-20507-001
4
www.amis.com