PI200MC-A4 Datasheet, PDF (3/7 Pages) AMI SEMICONDUCTOR – 200DPI CIS Module

All these discussed components are housed in a small plastic housing which has a cover
glass, the window. This housing with its sealed windows protects the imaging array, the
micro lens assembly, and the LED light source from dust.
DOCUMENT SURFACE
LIGHT PATH
GLASS WINDOW
LED ^BAR
PCB
SENSORS
INSIDE PICTORIAL OF MODULE
Figure 2. PI200M-A4 Cross Section
Pin Out Description
There is one connector located at the end of the module. The outline of the module in
Figure 4 of the mechanical section illustrates the connector location. With the module
window facing down on flat surface, with the viewer looking down on backside of the
module, and with the connector's pins facing viewer, the connectors is located on the left
hand end of the module. The connector is a 2.0mm dual 8-pin rows with a total of 16 pin
connector, part # Berg 88054-X16. Its I/O designation is provided in Table 1. I/O
Designation. Pin number 1 location is indicated on the module outline. All of the odd pins
are on the bottom row with pin number one on the edge closest to end of module. All of
even pins are on the top row with pin 2 located adjacent to the pin 1.
Pin Number
1, 2 , 4 & 8
3
5&6
7
9 &10
11 & 12
13 & 14
15 & 16
Symbol
Gnd
Vout
Vdd (+5V)
SP
Vn (-5V to –12V)
CP
GLED
VLED
Names and Functions
Ground; 0V
Analog Video Output
Positive power supply
Start Clock Pulse
Negative power supply
Sampling clock pulse
Ground for the light source; 0V
Supply for the light source
Table 1. I/O Designation
PAGE 3 OF 7 - PI200M-A4, 01/31/01