AMIS-710324 Datasheet, PDF (3/9 Pages) AMI SEMICONDUCTOR – 300dpi CIS Module

AMIS-710324-A4: 300dpi CIS Module
Data Sheet
4.0 I/O Designation
There are two connectors located at the ends of the modules. The outline of the module in Figure 5 of the mechanical section illustrates
these connector locations. With the module window facing down on a flat surface and with the viewer looking down on the backside of
the module, the connectors are located on each end of the module with their pins pointing toward the viewer. The connectors for
Section 1 have 12 pins and are located on the right-hand side. The part number is JAE IL-Z-12P-S125L3-E. Its pin numbers and
designations are listed in Table 1.
Table 1: Pin Configuration for Section 1 Connector
Pin Number
Symbol
1
Vout1
2
Gnd
3
Vdd (+5V)
4
Vn (-5V )
5
Gnd
6
SP1
7
Gnd
8
CP
9
GLED
10
VLED
11
LED (future)
12
LED (future)
Names and Functions
Analog video output
Ground; 0V
Positive power supply
Negative power supply
Ground; 0V
Shift register SP
Ground; 0V
Sampling clock pulse
Ground for the light source; 0V
Supply for the light source
Supply for future LED source
Supply for future LED source
The connector for Section 2 has eight pins and is located on the left-hand side. The part number is JAE IL-Z-8P-S125L3-E. The pin
numbers and designations for the connector are listed in Table 2.
Table 2: Pin Configuration for Section 2 Connector
Pin Number
Symbol
1
Vout2
2
Gnd
3
Vdd (+5V)
4
Vn (-5V)
5
Gnd
6
SP2
7
Gnd
8
CP
Names and Functions
Analog video output
Ground; 0V
Positive power supply
Negative power supply
Ground; 0V
Shift register SP
Ground; 0V
Sampling clock pulse
AMI Semiconductor – Jun. 06, M-20564-001
3
www.amis.com