English
Language : 

AMIS-710201 Datasheet, PDF (3/7 Pages) AMI SEMICONDUCTOR – 200dpi CIS Module
◁
AMIS-710201: 200dpi CIS Module
Data Sheet
5.0 Recommended Operating Conditions (25°C)
Table 2: Recommended Operating Conditions (25°C)
Item
Symbol
Min.
Typical
Max.
Units
Power supply
Vdd
4.5
5.0
5.5
V
Vn.
-4.5
-5
-12
V
VLED
5
V
Idd
11
30
ma
Ivn
6.0
10.0
ma
ILED
350
550
ma
Input voltage at digital high
Vih
Vdd-1.0
Vdd-.5
Vdd
V
Input voltage at digital low
Clock frequency
Vil
0
f
0.8
1.0 (1)
V
MHz
Clock pulse high duty cycle
25
%
Clock pulse high duration
250
ns
Integration time
Operating temperature
Tint
1.728
10.0
ms
Top
25
50
°C
Note:
1. The module will produce video above 1.5MHz, but with adjacent pixel smearing. Hence, with signal degradation it can be used above 1.5MHz.
Table 3: Operating Environment
Parameter
Operating temperature
Operating humidity
Storage temperature
Storage humidity
Symbols
Top
Hop
Tstg
Hstg
Maximum Rating
0 to 50
10 to 85
-25 to+75
10 to 90
Units
°C
%
°C
%
6.0 Electro-Optical Characteristics (25oC)
Table 4: Electro-Optical Characteristics (25°C)
Parameter
Symbol
Parameter
Units
Note
Number of photo detectors
1728
Elements
Pixel-to-pixel spacing
Line scanning rate
Tint(1)
125
1.728
µm
ms
@ 1.0MHz clock
Clock frequency(2)
Bright output voltage(3)
Bright output non-uniformity(4)
Adjacent pixel non-uniformity(5)
Dark non-uniformity(6)
Dark output voltage(6)
Modulation transfer function(7)
1.0
0.6
<+/-30
<25
<200
<200
>30
MHz
Volts
%
%
mV
mV
%
frequency
Definitions:
1. Tint: line scanning rate or integration time. Tint is determined by the interval of two start pulse (SP).
2. f: main clock frequency.
3. Vpavg = ∑ Vp(n)/1728
4. Up = [(Vpmax - Vp) / Vp] x 100% or [(Vp - Vpmin) / Vp] x 100%.
5. Upadj = MAX[ | (Vp(n) - Vp(n+l) | / Vp(n)] x 100% Upadj is the nonuniformity percentage pixel-to-pixel.
6. Ud = Vdmax – Vdmin
Vdmin is the minimum output on a black document(O.D.=0.8).
Vdmax: maximum output voltage of black document (O.D.= 0.8).
7. MTF = [(Vmax - Vmin) / (Vmax + Vmin)] x 100 [%] Vmax: maximum output voltage at 4.0lp/mm Vmin: minimum output voltage at 4.0lp/mm.
8. lp / mm: line pair per mm.
9. O.D. Optical Density
AMI Semiconductor – May 06, M-20539-001
3
www.amis.com
 ▷