AMIS-52100 Datasheet, PDF (15/26 Pages) AMI SEMICONDUCTOR – Transceiver with Clock and Data Recovery

AMIS-52100 Low-Power Transceiver with Clock and Data Recovery
Data Sheet
Table 24: Sniff Function Control Registers
Control Registers Associated with the Sniff Function
Register (HEX) Name
Bits
0x0b
SNIFF Threshold
All
0x0c
WAKE on RSSI
5
0x0d
SNIFF TIMER RES
3
0x13
0x16
0x18
0x19
0x1a
0x1b
DATA FILTER
All
IRQ DELAY
All
RSSI DELAY
All
SNIFF TIMER
All
OFFSET DWELL
All
DATA FILTER PRE-DIVIDER
All
States
0
1
0
1
Comments
Reference level for detected RF
Do not wake on RSSI
Wake on RSSI > threshold
Resolution is set to 0.5mS per step
Resolution is set to 64mS per step
Delay from RX wakeup to data sampled
Time I²C and TX/RX are active to indicate a wakeup
Delay from wakeup to RSSI being checked
Time that receiver is off in Sniff Mode
Time allowing receiver to power up (typically >40uS)
Delay from data detection to pre-clock output
Figure 9: Receiver Data Acquisition in Sniff Mode
AMI Semiconductor – Rev 4.0, Mar. 06 – M-20535-004
15
www.amis.com