PI310MC-DR Datasheet, PDF (1/10 Pages) AMI SEMICONDUCTOR – 300DPI CIS Two Level Digital Output Module

™ _Peripheral
Imaging
Corporation
PI310MC-DR
300DPI CIS Two Level Digital Output Module
Engineering Data Sheet
Key Features
• Light source, lens, and sensor are integrated into a single module
• 11.8 dpm resolution, 89 mm scanning length
• Up to 423 µsec/line scanning speed, with 2.5 MHz pixel rate (See Table 3, Note 3.)
• Wide dynamic range
• Two-Level Tracking Digital Output (“Dynamic Threshold Digitizer”)
• Standard Yellow-Green light source (Other colors are available)
• Compact size ^~= 15 mm x 25.6 mm x 102 mm
• Low power
• Light weight
General Description
The PI310MC-DR is a contact image sensor, CIS, module with an additional on board
circuit that digitizes the analog pixels from the CIS image sensor to a “background-
tracking”, two-level digital output signal. It is based on the PI305M-A6 CIS module
manufactured by PIC, but with a shorter read length of 89 mm. Hence, its performance is
equivalent to the PI305M-A6 that uses MOS image sensor technology to gains its high-
speed performance and high sensitivity. The PI310MC-DR is suitable for scanning
documents with widths up to 89 mm and with resolution of 11.8 dots per millimeter. It has
broad applications, but was specially designed for the following areas:
• Where data compression is required, such as in data transmissions.
• Where component pin-out count must be kept to a minimum.
PAGE 1 of 10 PI310MC-DR Description, 7/30/99