PI214MC-DR Datasheet, PDF (1/8 Pages) AMI SEMICONDUCTOR – 200DPI CIS Two Level Digital Output Module

™ _Peripheral
Imaging
Corporation
PI214MC-DR
200DPI CIS Two Level Digital Output Module
Engineering Data Sheet
Key Features
• Light source, lens, and sensor are integrated into a single module
• 8 dpm resolution, 216 mm scanning length
• Up to 440 µsec/line scanning speed, with 4.0 MHz pixel rate (See Table 3, Note 2.)
• Wide dynamic range
• Two-Level Tracking Digital Output (“Dynamic Threshold Digitizer”)
• Red (660 nm) light source (Other colors are available)
• Compact size ≅ 19.5 mm x 21.5 mm x 232 mm
• Low power
• Light weight
General Description
The PI214MC-DR is a contact image sensor, CIS, module with an additional on board
circuit that digitizes the analog pixels from the CIS image sensor to a “background-
tracking”, two-level digital output signal. It is based on Peripheral Imaging Corp’s CIS
module that employs MOS image sensor technology to gain its high-speed performance
and high sensitivity. The PI214MC-DR is suitable for scanning documents with width of
216 mm and with resolution of 8 dots per millimeter. Its has a broad applications, but
specially designed for the following areas:
Page 1 of 8 PI214MC-DR, 11/29/99