N64S08XXHDA Datasheet, PDF (1/15 Pages) AMI SEMICONDUCTOR – 64Kb Low Power Serial SRAMs 8K × 8 bit Organization

AMI Semiconductor, Inc.
ULP Memory Solutions
670 North McCarthy Blvd. Suite 220
Milpitas, CA 95035
PH: 408-935-7777, FAX: [phone]
64Kb Low Power Serial SRAMs
8K × 8 bit Organization
N64S0818HDA/N64S0830HDA
Advance Information
Overview
Features
The AMI Semiconductor serial SRAM family
includes several integrated memory devices
including this 64K serially accessed Static
Random Access Memory, internally organized as
8K words by 8 bits. The devices are designed and
fabricated using AMI’s advanced CMOS
technology to provide both high-speed
performance and low power. The devices operate
with a single chip select (CS) input and use a
simple Serial Peripheral Interface (SPI) serial bus.
A single data in and data out line is used along with
a clock to access data within the devices. The
N64S08xxHDA devices include a HOLD pin that
allows communication to the device to be paused.
While paused, input transitions will be ignored.
The devices can operate over a wide temperature
range of -40^oC to +85^oC and can be available in
several standard package offerings.
• Power Supply Options
1.8V to 3.6V
• Very low standby current
As low as 200nA
• Very low operating current
As low as 500uA
• Simple memory control
Single chip select (CS)
Serial input (SI) and serial output (SO)
• Flexible operating modes
Word read and write
Page mode (32 word page)
Burst mode (full array)
• Organization
8K x 8 bit
• Self timed write cycles
• Built-in write protection (CS high)
• HOLD pin for pausing communication
• High reliability
Unlimited write cycles
• RoHS Compliant Packages
Green SOIC and TSSOP
Device Options
Part Number
N64S0818HDA
N64S0830HDA
Density
64Kb
Power
Supply (V)
1.8
3.0
Speed
(MHz)
20
25
Feature
HOLD
Typical
Standby
Current
200nA
1uA
Read/Write
Operating Current
500 uA @ 1Mhz
1
This is a developmental specification and is subject to change without notice.