AMIS-30585 Datasheet, PDF (1/11 Pages) AMI SEMICONDUCTOR – S-FSK PLC Modem

AMIS-30600 LIN Transceiver
Data Sheet
1.0 Key Features
LIN-Bus Transceiver
• LIN compliant to specification rev. 1.3 and rev. 2.0
• I²T high voltage technology
• Bus voltage ± 40V
• Transmission rate up to 20 kBaud
• SOIC-150-8 Package
Protection
• Thermal shutdown
• Indefinite short circuit protection to supply and ground
• Load dump protection (45V)
Power Saving
• Operating voltage = 4.75 to 5.25V
• Power down supply current < 50µA
EMS Compatibility
• Integrated filter and hysteresis for receiver
EMI Compatibility
• Integrated slope control for transmitter
• Slope control dependant from Vbat to enable maximum capacitive-load
2.0 General Description
The single-wire transceiver AMIS-30600 is a monolithic integrated circuit in a SOIC-8 package. It works as an interface between
the protocol controller and the physical bus.
The AMIS-30600 is especially suitable to drive the bus line in LIN systems in automotive and industrial applications. Further it can
be used in standard ISO9141 systems.
In order to reduce the current consumption the AMIS-30600 offers a stand-by mode. A wake-up caused by a message on the bus
pulls the INH-output high until the device is switched to normal operation mode.
The transceiver is implemented in I²T100 technology enabling both high-voltage analog circuitry and digital functionality to co-exist
on the same chip.
The AMIS-30600 provides an ultra-safe solution to today’s automotive in-vehicle networking (IVN) requirements by providing
unlimited short circuit protection in the event of a fault condition.
3.0 Ordering Information
Table 1: Ordering Code
Marketing Name
AMIS30600AGA
Package
SOIC 150 8 150 4
Temp. Range
-40°C…125°C
AMI Semiconductor – Rev. 2.0, Apr. 2005
www.amis.com
1