SL1040002 Datasheet, PDF (1/1 Pages) AMETHERM Circuit Protection Thermistors – Circuit Protection Thermistors

DATA SHEET
Part Number: SL10 40002
Ordering Different Lead Types:
Inside Kinked Leads
Use -A after Ametherm’s part #
Outside Kinked Leads _{Use -B after Ametherm’s part #}
For example: to order an inside kinked lead use part number SL10 40002-A
D
D
D
T
B
L
S
STRAIGHT
LEADS
S
OUTSIDE
KINKED LEADS
S
INSIDE
KINKED LEADS
Electrical Specifications:
Resistance @ 25°C
Max Steady State Current Up to 65°C
Max Recommended Energy Rating (Joules)
Actual Failure Point of Instantaneous Energy (Joules)
Resistance @ 100% of Max Current
Resistance @ 50% of Max Current
Body Temperature @ 100% Current Rating
Dissipation Constant
Thermal Time Constant
Material Type
Max Recommended Capacitance @ 120VAC/240VAC
40.0 Ω ± 20%
2.0 A
15.0 J
40.0 J
0.650 Ω
1.55 Ω
142 °C
11.0mW/°C
25 seconds
“H”
1000µF/ 250µF
C
Mechanical Specifications:
D
T
Lead Diameter
S
L
Coating Run Down
Above the Kink
B
C
10.0 ± 0.5 mm
3.0 ± 0.2 mm
0.5 ± 0.1 mm
5.1 ± 1.0 mm
12.7 ± 1.0 mm
3.50 ± 0.3 mm
11.5 ± 3.50 mm
2.2 ± 0.3 mm
CSA File Number: #CA118061
Revision Date: March 19, 2003
Ametherm, Inc. 3111 N. Deer Run Road #4 Carson City, NV 89701
Telephone: [phone] [phone] Fax: [phone]
www.ametherm.com