MS1515004 Datasheet, PDF (1/1 Pages) AMETHERM Circuit Protection Thermistors – Circuit Protection Thermistors

DATA SHEET
Part Number: MS15 15004
Ordering Different Lead Types:
Inside Kinked Leads
Use -A after Ametherm’s part #
Outside Kinked Leads _{Use -B after Ametherm’s part #}
For example: to order an inside kinked lead use part number MS15 15004-A
D
D
D
T
B
L
S
STRAIGHT
LEADS
S
OUTSIDE
KINKED LEADS
S
INSIDE
KINKED LEADS
Electrical Specifications:
Resistance @ 25°C
Max Steady State Current Up to 65°C
Max Recommended Energy Rating (Joules)
Actual Failure Point of Instantaneous Energy (Joules)
Resistance @ 100% of Max Current
Resistance @ 50% of Max Current
Body Temperature @ 100% Current Rating
Dissipation Constant
Thermal Time Constant
Material Type
Max Recommended Capacitance @120/240/440VAC
15.0 Ω ± 25%
4.5A
155.0 J
310.0 J
0.200 Ω
0.850 Ω
144 °C
49.4mW/°C
114 seconds
“G”
10500µF/2600µF/
800µF
C
Mechanical Specifications:
D
T
Lead Diameter
S
L
Straight Leads
Coating Run Down
B
C
15.0 ± 1.0 mm
7.0 ± 0.7 mm
1.0 ± 0.1 mm
7.8 ± 2.0 mm
38.0 ± 9.0 mm
5.0 ± 1.0 mm
6.30 ± 0.60 mm
6.50 ± 0.60 mm
Revision Date: March 19, 2003
Ametherm, Inc. 3111 N. Deer Run Road #4 Carson City, NV 89701
Telephone: [phone] [phone] Fax: [phone]
www.ametherm.com