H21LOB Datasheet, PDF (2/7 Pages) America Semiconductor, LLC – Logic Output Interrupter Switch

Absolute Maximum Ratings (TA = 25^O C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or
be operable above the recommended operating conditions and stressing the parts to these levels is not
recommended. In Addition, extended exposure to stresses above the recommended operating conditions
may affect device reliability. The absolute maximum ratings are stress ratings only.
Symbol
TOPR
Parameter
Operating Temperature
Rating
-40 to +85
Units
o_C
TSTG
Storage Temperature
-40 to +85
o_C
TSOL-I
Soldering Temperature (Solder Iron) ^(3,4,5,6)
240 for 5 sec
o_C
TSOL-F
Soldering Temperature (Solder Flow) ^(3,4.5.6)
260 for 10 sec
o_C
Emitter
IF
Continuous Forward Current ⁽¹⁾
50
mA
VR
Reverse Voltage
5
V
PD
Power Dissipation⁽¹⁾
100
mW
Sensor
IO
Output Current
50
mA
VCC
Supply Voltage
4.0-16
V
VO
Output Voltage
30
V
PD
Power Dissipation ⁽²⁾
150
mW
Notes:
1. Derate power dissipation linearly, on Emitter, 1.67 mW/^OC above 25^OC.
2. Derate power dissipation linearly, 2.50 mW/^OC above 25^OC.
3. RMA Flux is recommended.
4. Methanol or isopropyl alcohols are recommended as cleaning agents.
5. Soldering iron tip 1.6mm from housing.
6. As long as leads are not under stress or spring tension
Input/Output Table
Part Number LED
H21LTB
On
H21LTB
Off
H21LTI
On
H21LTI
Off
H21LOB
On
H21LOB
Off
H21LOI
On
H21LOI
Off
Output
High
Low
Low
High
High
Low
Low
High
Tel. [phone] Fax. [phone]
133 Kings Road
Madison, New Jersey 07940
United States of America
© 2016 American Microsemiconductor, Inc.
Specifications are subject to change without notice
www.americanmicrosemi.com
Document Page 2 of 7
Revised 05/2016
DEKRA Certification Inc.
AS9100C and ISO 9001:2008
Certificate No. 131519.01