AME5172 Datasheet, PDF (3/12 Pages) Analog Microelectronics – 0.85V Single Cell Boost DC-DC Converter

AME, Inc.
AME5172
n Pin Configuration
SOT-25
Top View
5
4
AME5172
1
2
3
AME5172AEEV
1. IN
2. GND
3. EN
4. OUT
5. SW
* Die Attach:
Conductive Epoxy
0.85V Single Cell Boost
DC-DC Converter
n Pin Description
Pin Number Pin Name
1
IN
2
GND
Pin Description
Input Supply Pin.
Place bypass capacitor as close to V_IN as possible.
Ground connection Pin.
3
EN
Enable Control Input Pin. (Active High)
Power Output Pin.
4
OUT
PCB layout from output capacitor should be as short and wide as
possible..
This is the switch pin and is connected to the drain of the internal NMOS
5
SW
power switch. Minimize the metal trace area connected to this pin to
minimize EMI.
Rev. A.02
3