AME5150 Datasheet, PDF (3/14 Pages) Analog Microelectronics – Micropower Inverting DC/DC Converter

AME, Inc.
AME5150
n Pin Configuration
SOT-25/TSOT-25
Top View
5
4
AME5150
1
2
3
AME5150AEEV
1. SW
2. GND
3. NFB
4. EN
5. IN
Die Attach:
Conductive Epoxy
n Pin Description
Micropower Inverting
DC/DC Converter
Pin Number Pin Name
1
SW
2
GND
Pin Description
Power Switch input.
This is the drain of the internal NMOS power switch. Minimize the metal
trace area connected to this pin to minimize EMI.
Ground.
Tie directly to ground plane.
Output voltage feedback input.
Set the output voltage by selecting values for R1 and R2 using:
3
NFB
R1 = ^{VOUT − VNFB}
VNFB
+ INFB
R2
Enable control input, active high.
4
EN
The enable pin is an active high control. Tie this pin above 1.5V to enable
the device. Tie this pin below 0.4V to turn off the device.
Analog and Power input.
5
IN
Input Supply Pin. Bypass this pin with a capacitor as close to the device
as possible.
Rev.A.01
3