AME8844_09 Datasheet, PDF (2/16 Pages) Analog Microelectronics – 750mA CMOS LDO

AME
AME8844
n Pin Configuration
MSOP-8
Top View
8 765
AME8844
1 234
AME 8844BEQAADJ
1. EN
2. IN
3. ADJ
4. OUT
5. GND
6. GND
7. GND
8. GND
* Die Attach:
Conductive Epoxy
750mA CMOS LDO
MSOP-8
Top View
8 765
AME8844
1 234
AME 8844CEQAxxx
1. EN
2. IN
3. NC
4. OUT
5. GND
6. GND
7. PG
8. GND
* Die Attach:
Conductive Epoxy
n Pin Description
Pin Number
Pin Name
AME8844BEQA AME8844CEQA
1
1
EN
2
2
IN
Pin Description
Enable pin.
When pulled low, the PMOS pass transistor turns off, current
consuming less than 1µA.
Input voltage pin.
It should be decoupled with 1µF or greater capacitor.
3
N/A
ADJ
Feedback output voltage for adjustable device.
N/A
4
N/A
5, 6, 7, 8
3
4
7
5, 6, 8
NC
OUT
PG
GND
No connection.
LDO voltage regulator output pin.
It should be decoupled with a 4.7µF or greater value low ESR
ceramic capacitor.
Power-Good output.
This open-drain output is low when output is out of regulation.
Ground connection pin.
2
Rev.F.01