AME8804_12 Datasheet, PDF (2/18 Pages) Analog Microelectronics – 300mA CMOS LDO

AME
AME8804
300mA CMOS LDO
n Pin Configuration
SOT-26/TSOT-26
Top View
65
4
AME8804
1
2
3
AME8804AEEY
1. IN
2. GND
3. EN
4. PG
5. ADJ
6. OUT
SOT-25 /TSOT-25
Top View
5
4
AME8804
1
2
3
AME8804AEEV
1. IN
2. GND
3. EN
4. ADJ
5. OUT
SOT-25 /TSOT-25
Top View
5
4
AME8804
1
2
3
n Pin Description
* Die Attach:
Non-Conductive Epoxy
AME8804BEEVADJ
1. EN
2. GND
3. IN
4. OUT
5. ADJ
* Die Attach:
Conductive Epoxy
* Die Attach:
Conductive Epoxy
Pin Name
Pin Description
IN
Input voltage pin.
It should be decoupled with 1µF or greater capacitor.
GND
EN
PG
OUT
Ground connection pin.
Enable pin.
When pulled low, the PMOS pass transistor turns off, current consuming less than
1µA.
Power-Good output.
This open-drain output is low when OUT is out of regulation.
LDO voltage regulator output pin.
It should be decoupled with a 1µF or greater value low ESR ceramic capacitor.
ADJ
Feedback output voltage for adjustable device.
2
Rev.K.04