AME1300 Datasheet, PDF (1/12 Pages) Analog Microelectronics – 300mA CMOS LDO with RESET Function

AME
AME1300
300mA CMOS LDO with
RESET Function
n General Description
The AME1300 combines a Low Dropout Regulator and
a Microprocessor Reset Monitor in a space-saving MSOP-
8 package. Total supply current is 50µA (typical), 20 to
60 times lower than in bipolar regulators .
The AME1300 has an extremely precise output with a
typical accuracy of ±1.5%. Other key features include
ultra low noise operation, very low dropout voltage and
internal feed-forward compensation for fast response to
step changes in load. The AME1300 incorporates both
over-temperature and over-current protection. When the
shutdown control EN is low, the regulator output voltage
falls to zero, RESETB output remains valid and supply
current is reduced to 10µA(typical). The AME1300 is
stable with an output capacitor of only 2.2µF and has a
minimum output current of 300 mA.
An active low RESET is asserted when the detected
voltage (V_DET) falls below the reset voltage threshold. The
reset output remains low for 300msec(typical) after V_DET
rises above reset threshold. The AME1300 also has a
fast wake up response time (10µsec typically) when re-
leased from shutdown.
n Features
l LDO with intergrated Microprocessor Reset
Monitor Functionality
l Guaranteed 300mA Output
l Accurate to within 1.5%
l 50µA Quiescent Current
l Over-Temperature Shutdown
l Current Limiting
l Short Circuit Current Fold-back
l Noise Reduction Bypass Capacitor
l Power-Saving Shutdown Mode
l Space-Saving MSOP Package
l Factory Pre-set Output Voltages
l Low Temperature Coefficient
l All AME's Lead Free Products Meet RoHS
Standards.
n Applications
l Instrumentation
l Portable Electronics
l Wireless Devices
l Cellular / GSM / CDMA Phones
l PC Peripherals
l Battery Powered Widgets
n Typical Applications
RESETB
V_OUT
RESETB
V_DET
V_DET
V_DET and V_OUT can be
connected together
OUT
IN
V_IN
1300
GND
NC
BYP
470pF
CBypass
(Option)
EN
SHUTDOWN
CONTROL
n Pin Configuration
MSOP-8
Top View
8 765
AME1300
1 234
AME1300
1. RESETB
2. OUT
3. GND
4. BYP
5. EN
6. NC
7. IN
8. V_DET
Die Attach:
Conductive Epoxy
Rev.C.02
1