AM27X040 Datasheet, PDF (8/10 Pages) Advanced Micro Devices – 4 Megabit (512 K x 8-Bit) CMOS ExpressROM Device

AC CHARACTERISTICS
Parameter Symbols
JEDEC Standard
Description
t_AVQV
t_ELQV
t_GLQV
t_EHQZ
t_GHQZ
t_AXQX
t_ACC Address to Output Delay
t_CE
t_OE
t_DF
(Note 2)
t_OH
Chip Enable to Output Delay
Output Enable to Output Delay
Chip Enable High or Output
Enable High to Output High Z,
Whichever Occurs First
Output Hold Time from
Addresses, CE# or OE#,
Whichever Occurs First
Test Setup
CE#,
OE# = V_IL
Max
OE# = V_IL Max
CE# = V_IL Max
Max
Min
Am27X040
-90 -120 -150 -200 Unit
100 120 150 200
ns
100 120 150 200
ns
40
50
55
60
ns
30
30
30
40
ns
0
0
0
0
ns
Caution: Do not remove the device from (or insert it into) a socket or board that has V_PP or V_CC applied.
Notes:
1. V_CC must be applied simultaneously or before V_PP, and removed simultaneously or after V_PP.
2. This parameter is sampled and not 100% tested.
3. Switching characteristics are over operating range, unless otherwise specified.
4. See Figure 3 and Table 1 for test specifications.
SWITCHING WAVEFORMS
2.4
Addresses
0.45
2.0
0.8
Addresses Valid
2.0
0.8
CE#
t_CE
OE#
Output
High Z
t_OE
t_ACC
(Note 1)
t_OH
Valid Output
t_DF (Note 2)
High Z
15654D-9
Notes:
1. OE# may be delayed up to t_ACC – t_OE after the falling edge of the addresses without impact on t_ACC.
2. t_DF is specified from OE# or CE#, whichever occurs first.
PACKAGE CAPACITANCE
Parameter
Symbol
Parameter Description Test Conditions
C_IN
Input Capacitance
V_IN = 0
C_OUT
Output Capacitance
V_OUT = 0
Notes:
1. This parameter is only sampled and not 100% tested.
2. T_A = +25°C, f = 1 MHz.
PD 032
PL 032
Typ
Max
Typ
Max
Unit
10
12
8
10
pF
12
15
9
12
pF
8
Am27X040