AM27X010 Datasheet, PDF (6/10 Pages) Advanced Micro Devices – 1 Megabit (128 K x 8-Bit) CMOS ExpressROM Device

DC CHARACTERISTICS over operating range (unless otherwise specified)
Parameter
Symbol
Parameter Description
Test Conditions
Min
Max
Unit
V_OH
Output HIGH Voltage
I_OH = –400 µA
V_OL
Output LOW Voltage
I_OL = 2.1 mA
V_IH
Input HIGH Voltage
V_IL
Input LOW Voltage
I_LI
Input Load Current
V_IN = 0 V to V_CC
I_LO
Output Leakage Current
V_OUT = 0 V to V_CC
I_CC1
V_CC Active Current (Note 2)
CE# = V_IL, f = 10 MHz,
I_OUT = 0 mA
I_CC2
V_CC TTL Standby Current
CE# = V_IH
I_CC3
V_CC CMOS Standby Current
CE# = V_CC ± 0.3 V
2.4
2.0
–0.5
V
0.45
V
V_CC + 0.5
V
+0.8
V
1.0
µA
10
µA
30
mA
1.0
mA
100
µA
Caution: The device must not be removed from (or inserted into) a socket when V_CC or V_PP is applied.
Notes:
1. V_CC must be applied simultaneously or before V_PP, and removed simultaneously or after V_PP..
2. I_CC1 is tested with OE# = V_IH to simulate open outputs.
3. Minimum DC Input Voltage is –0.5 V. During transitions, the inputs may overshoot to –2.0 V for periods less than 20 ns.
Maximum DC Voltage on output pins is V_CC + 0.5 V, which may overshoot to V_CC + 2.0 V for periods less than 20 ns.
30
25
20
15
10
1 2 3 4 5 6 7 8 9 10
Frequency in MHz
12080F-5
Figure 1. Typical Supply Current vs. Frequency
V_CC = 5.5 V, T = 25°C
30
25
20
15
10
–75 –50 –55 0 25 50 75 100 125 150
Temperature in °C
12080F-6
Figure 2. Typical Supply Current vs. Temperature
V_CC = 5.5 V, f = 10 MHz
6
Am27X010