AM29LV640D_07 Datasheet, PDF (36/57 Pages) Advanced Micro Devices – 64 Megabit (4 M x 16-Bit) CMOS 3.0 Volt-only Uniform Sector Flash Memory with VersatileIO™ Control

DC CHARACTERISTICS
CMOS Compatible
DATA SHEET
Parameter
Symbol
Parameter Description
Test Conditions
Min
Typ
Max
Unit
I_LI
Input Load Current (Note 1)
I_LIT
A9, ACC Input Load Current
I_LO
Output Leakage Current
I_CC1
V_CC Active Read Current
(Notes 2, 3)
V_IN = V_SS to V_CC,
V_CC = V_{CC max}
V_CC = V_{CC max}; A9 = 12.5 V
V_OUT = V_SS to V_CC,
V_CC = V_{CC max}
CE# = V_IL, OE# ₌ V_IH
5 MHz
1 MHz
±1.0
µA
35
µA
±1.0
µA
9
16
mA
2
4
I_CC2
V_CC Active Write Current (Notes 3, 4) CE# = V_IL, OE# ₌ V_IH, WE# = V_IL
26
30
mA
I_CC3
V_CC Standby Current (Note 3)
CE#, RESET# = V_CC ± 0.3 V,
WP# = V_IH
0.2
5
µA
I_CC4
V_CC Reset Current (Note 3)
RESET# = V_SS ± 0.3 V, WP# = V_IH
0.2
5
µA
I_CC5
Automatic Sleep Mode (Notes 3, 5)
V_IH = V_CC ± 0.3 V;
V_IL = V_SS ± 0.3 V, WP# = V_IH
0.2
5
µA
ACC pin
I_ACC
ACC Accelerated Program Current CE# = V_IL, OE# = V_{IH VCC pin}
5
10
mA
15
30
mA
V_IL
Input Low Voltage (Note 6)
–0.5
0.8
V
V_IH
Input High Voltage (Note 6)
0.7 x V_CC
V_CC + 0.3 V
V_HH
Voltage for ACC Program
Acceleration
V_CC = 3.0 V ± 10%
11.5
12.5
V
V_ID
Voltage for Autoselect and Temporary
Sector Unprotect
V_CC = 3.0 V ± 10%
8.5
12.5
V
V_OL
Output Low Voltage
I_OL = 4.0 mA, V_CC = V_{CC min}
0.45
V
V_OH1
Output High Voltage
I_OH = –2.0 mA, V_CC = V_{CC min}
0.8 V_IO
V
V_OH2
I_OH = –100 µA, V_CC = V_{CC min}
V_IO–0.4
V
V_LKO Low V_CC Lock-Out Voltage (Note 7)
2.3
2.5
V
Notes:
1. On the WP# pin only, the maximum input load current when WP# = V_IL is ± 5.0 µA.
2. The I_CC current listed is typically less than 2 mA/MHz, with OE# at V_IH.
3. Maximum I_CC specifications are tested with V_CC = V_CCmax.
4. I_CC active while Embedded Erase or Embedded Program is in progress.
5. Automatic sleep mode enables the low power mode when addresses remain stable for t_ACC + 30 ns. Typical sleep mode current is
200 nA.
6. If V_IO < V_CC, maximum V_IL for CE# and DQ I/Os is 0.3 V_IO. If V_IO < V_CC, minimum V_IH for CE# and DQ I/Os is 0.7 V_IO. Maximum V_IH
for these connections is V_IO + 0.3 V
7. Not 100% tested.
34
Am29LV640D/Am29LV641D
22366C6 January 22, 2007