AM29LV033C Datasheet, PDF (29/48 Pages) Advanced Micro Devices – 32 Megabit (4 M x 8-Bit) CMOS 3.0 Volt-only Uniform Sector Flash Memory

ABSOLUTE MAXIMUM RATINGS
Storage Temperature
Plastic Packages . . . . . . . . . . . . . . . –65°C to +150°C
Ambient Temperature
with Power Applied. . . . . . . . . . . . . . –65°C to +125°C
Voltage with Respect to Ground
V_CC (Note 1) . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V
A9, OE#, and
RESET# (Note 2) . . . . . . . . . . . .–0.5 V to +12.5 V
All other pins (Note 1) . . . . . . .–0.5 V to V_CC+0.5 V
Output Short Circuit Current (Note 3) . . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V.
During voltage transitions, input or I/O pins may
overshoot V_SS to –2.0 V for periods of up to 20 ns. See
Figure 7. Maximum DC voltage on input or I/O pins is
V_CC +0.5 V. During voltage transitions, input or I/O pins
may overshoot to V_CC +2.0 V for periods up to 20 ns. See
Figure 8.
2. Minimum DC input voltage on pins A9, OE#, and RESET#
is –0.5 V. During voltage transitions, A9, OE#, and RESET#
may overshoot V_SS to –2.0 V for periods of up to 20 ns. See
Figure 7. Maximum DC input voltage on pin A9 is +12.5 V
which may overshoot to 14.0 V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a
time. Duration of the short circuit should not be greater than
one second.
Stresses above those listed under “Absolute Maximum Rat-
ings” may cause permanent damage to the device. This is a
stress rating only; functional operation of the device at these
or any other conditions above those indicated in the opera-
tional sections of this data sheet is not implied. Exposure of
the device to absolute maximum rating conditions for ex-
tended periods may affect device reliability.
OPERATING RANGES
Commercial (C) Devices
Ambient Temperature (T_A). . . . . . . . . . . .0°C to +70°C
Industrial (I) Devices
Ambient Temperature (T_A). . . . . . . . . .–40°C to +85°C
Extended (E) Devices
Ambient Temperature (T_A). . . . . . . . .–55°C to +125°C
V_CC Supply Voltages
V_CC for full voltage range. . . . . . . . . . . +2.7 V to 3.6 V
Operating ranges define those limits between which the func-
tionality of the device is guaranteed.
+0.8 V
V_SS–0.5 V
V_SS–2.0 V
20 ns
20 ns
20 ns
Figure 7. Maximum Negative
Overshoot Waveform
V_CC+2.0 V
V_CC+0.5 V
2.0 V
20 ns
20 ns
20 ns
Figure 8. Maximum Positive
Overshoot Waveform
28
Am29LV033C