52464 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Micro (Pick and Place) Photovoltaic Hi Voltage Output Optocoupler

52464
Micro (Pick and Place) Photovoltaic
Hi Voltage Output Optocoupler
Mii
HYBRID MICROELECTRONICS
PRODUCTS DIVISION
Features:
• 12V min. / 14V typical output at 25°C
• Input/Output Isolation Tested to 1000 VDC
• Mil Temp Range
• Pick and Place mounting
• Solderable terminations
Applications:
• FET and IGBT drivers
DESCRIPTION
The 52464 Photovoltaic Optocoupler is designed for Pick and Place applications using solder or conductive epoxy
attachment.
It is a single channel optocoupler consisting of optically coupled LED light to photovoltaic detector. Each micro-
coupler is 100% DC tested at 25°C. (+125°C testing or 100% element evaluation available upon request). All
couplers are designed to operate over the full military temperature range.
The 52464 is optimized for gate drive of FETs and IGBTs requiring full modulation.
ABSOLUTE MAXIMUM RATINGS
Continuous Input Current ......................................................................................................................................... 30mA
Storage Temperature Range ................................................................................................................. -65ºC to +125ºC
Operating Temperature ..........................................................................................................................-55ºC to +125ºC
Solder Temperature for 10 seconds...................................................................................................................... 300ºC
Reverse Input Voltage.............................................................................................................................................6 VDC
RECOMMENDED OPERATING CONDITIONS:
Parameter
Input Current
Operating Case Temperature
Symbol
I_{F (ON)}
T_C
Min.
1
-55
Max.
20
+125
Units
mA
°C
52464
Micro Photovoltaic Optocoupler
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com
E-MAIL: [e-mail]
1/23/04
Page 1 of 3