CS19227PBI Datasheet, PDF (4/5 Pages) Applied Micro Circuits Corporation – 10GE & OC192/48/12/3 DW/FEC/PM and AsyncMap Device with Strong FEC

RUBICON-LH
10GE & OC192/48/12/3 DW/FEC/PM and AsyncMap Device with Strong FEC
Product Brief
Part Number S19227PBI Revision 1.9, March 2006
APPLICATION DIAGRAMS
Figure 2: OC192/STM64 to OTU-2 Edge Transponder
Figure 2 shows the Rubicon-LH in an edge transponder applica-
tion. The client-side interface is achieved through the connection
to a standard 300 Pin MSA SFI4P1 Transponder. On the network
side, the AMCC S19235 and S3394 are used to provide a high-
performance interface to the network side optics. This diagram is
also the diagram for a mid-span transponder for either a standard
FEC to standard FEC network or a standard FEC to enhanced
FEC network. In either of these mid-span transponder applica-
tions, the client rate would increase from the standard SONET
rate to the 7% overhead rate.
Figure 2: OC192/STM64 to OTU-2 Edge Transponder
300Pin
MSA
M o d u le
10G E-LAN ,
O C 19 2/S T M 64
R ubicon-
LH
S19235
S3394
1 x OTU2
1 0 .7 G H z
DispersionXX-2 Chipset
4
Empowering Intelligent Optical Networks