English
Language : 

CS19233 Datasheet, PDF (2/2 Pages) Applied Micro Circuits Corporation – 10 G Ethernet/Fibre Channel/SONET/SDH Dual CDR
SPECIFICATIONS
S19233
AMCC Suggested Interface Devices
S19235 SFI4 Phase 1
SONET/SDH STS-192/10 Gig Ethernet CMOS Transceiver with ISI Compen-
sation
S19237 SFI4 Phase 1
SONET/SDH STS-192/10 Gig Ethernet CMOS Transceiver with ISI Compen-
sation
Transmitter Side Operations
• 1-bit serial data input
• Equalization to compensate for FR-4
• Threshold and Offset cancellation adjust
• Clock and Data recovery
• Data retime
Serial data output
• Receiver Side Operations
• Serial input with AGC (Equalization)
• 10 mVpp Differential Sensitivity with threshold adjust
• Loss of signal detection
• Clock and Data recovery
• Serial data output
Common Operations
• Optical and Electrical Loopbacks
• Power Down CDR
• Squelch
• Polarity Invert
6290 Sequence Dr.
San Diego, CA 92121
P 858 450 9333
F 858 450 9885
www.amcc.com
For technical support, please call 1-800-840-6055 or 858-535-6517, or email support@amcc.com.
AMCC reserves the right to make changes to its products, its datasheets, or related documentation, without notice and warrants its products solely pursuant to its terms and
conditions of sale, only to substantially comply with the latest available datasheet. Please consult AMCC’s Term and Conditions of Sale for its warranties and other terms, conditions
and limitations. AMCC may discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify,
before placing orders, that the information is current. AMCC does not assume any liability arising out of the application or use of any product or circuit described herein, neither does
it convey any license under its patent rights nor the rights of others. AMCC reserves the right to ship devices of higher grade in place of those of lower grade.
AMCC SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR
OTHER CRITICAL APPLICATIONS.
AMCC is a registered trademark of Applied Micro Circuits Corporation. PowerPC and the PowerPC logo are registered trademarks of IBM Corporation. All other trademarks are the
property of their respective holders. Copyright © 2006 Applied Micro Circuits Corporation. All Rights Reserved.
S19233_PB1592_v1.02_20061031