|
CS4805 Datasheet, PDF (1/3 Pages) Applied Micro Circuits Corporation – SONET/SDH STS-48/STM-16 Framer/Pointer Processor | |||
|
DANUBE
Product Brief
SONET/SDH STS-48/STM-16 Framer/Pointer Processor
Part Number S4805CBI11, Revision 1.5, January 2003
⢠SONET/SDH Mux/Demux, Transport Overhead Terminating
Transceiver and Pointer Processors for STS-48/STM-16 and
up to 4 x STS-12/STM-4 or 16 x STS-3/STM-1s.
⢠Serial STS-12/STM-4 and STS-3/STM-1 interfaces.
⢠Provisionable as SONET or SDH on a per line basis.
⢠Provisionable as SOH/LOH pass-through or termination/regen-
eration device.
⢠Built-in 192x48 cross-connects for STS-1 level cross-connec-
tion or add/drop, in both Mux and Demux directions.
⢠Compliant with Bellcore GR-253, ITU G.707, and ANSI T1.105
-1995 standards.
Multiplex Direction:
⢠Supports parallel STS-48/STM-16 or serial 4xSTS-12/STM-4
or serial 16xSTS-3/STM-1 inputs.
⢠Provides a single STS-48/STM-16 output.
⢠Pointer Processors for all valid input combinations of STS-48c/
AU-4-16c, STS-12c/AU-4-4c, STS-3c/AU-4, or STS-1/AU-3
signals.
⢠Non-intrusive TOH monitoring for all inputs: STS-48, 4xSTS-12
or 16xSTS-3.
⢠Provisionable pointer processor bypass available for STS-48 to
STS-48 operation (through-timing). Both a full bypass (no
frame regeneration) as well as a pointer processor bypass
(frame regeneration can be enabled) are provided.
⢠TOH can be either terminated/regenerated, or transparently
passed-through device on a per-function basis, in both
through-timing and pointer processor applications.
⢠For multiplex applications (4xSTS-12 or 16xSTS-3), the TOH
for the lower speed tributaries is passed-through in the unused
bytes of the outgoing STS-48 signal.
⢠STS-48 frame regeneration on output side. Provisionable pass-
through or regeneration of defined TOH bytes.
Demultiplex Direction:
⢠Supports a single STS-48/STM-16 input.
⢠Provides parallel STS-48/STM-16, serial 4xSTS-12/STM-4 or
serial 16xSTS-3/STM-1 outputs.
⢠Pointer Processor for all valid input combinations of STS-48c/
AU-4-16c, STS-12c/AU-4-4c, STS-3c/AU4, or STS-1/AU-3 sig-
nals.
⢠Non-intrusive STS-48/STM-16 TOH monitor.
⢠Provisionable pointer processor bypass available for STS-48 to
STS-48 operation (through-timing). Both a full bypass (no
frame regeneration) as well as a pointer processor bypass
(frame regeneration can be enabled) are provided.
⢠TOH can be either terminated/regenerated, or transparently
passed-through the device on a per-function basis, in both
through-timing and pointer processor applications.
⢠STS-48/STS-12/STS-3 frame regeneration on output side. Pro-
visionable pass-through or regeneration of defined TOH bytes.
Figure 1: Block Diagram
Low Speed
Interface
MX_LS_PCLK_IN
MX_LS_PDATA_IN[1:16]
MX_LSCLK_IN[1,5,9,13]
MX_LSDATA_IN[1,5,9,13]
DX_LS_PDATA_OUT[1:16]
DX_LS PCLK_OUT
DX_REFCLK_IN
DX_LSDATA_OUT[1,5,9,13]
DX_LSCLK_OUT_[1,5,9,13]
DTROOHP
4
POINTER
PROC.
MICROPROCESSOR I/F
4
Mux
Direction
INTSOEHRT
FRGN48
TOH
INSERT
DEMUX
TOH
INSERT
4
POINTER
PROC.
FRAM48
4 DemuxDirection TOHDROP
High Speed
Interface
MX_HS_155CLK_OUT
MX_HS_155DATA_OUT[1:16]
MX_HS_622CLK_OUT
MX_HS_622DATA_OUT[1:4]
DX_HS_155FRM_IN
DX_HS_155CLK_IN
DX_HS_155DATA[1:15]
DX_HS_622CLK_IN
DX_HS_622DATA_IN[1:4]
FINAL/PRODUCTION RELEASE Information - The information contained in
this document is about a product in fully tested and charactherized phase. All
features described herein are supported. Contact AMCC for updates to this
document and the latest product status.
Empowering Intelligent Optical Networks
|
▷ |