|
P0071 Datasheet, PDF (22/43 Pages) Altera Corporation – DE2-115 with LCD Touch Panel and Camera | |||
|
◁ |
 Demonstration Source Code
⢠Project directory: tPad_Starter
⢠Bit stream used: tPad_Starter.sof
⢠Nios II Workspace: tPad_Starter\Software
 Demonstration Batch File
Demo Batch File Folder:tPad_Starter\demo_batch
The demo batch file includes the following files:
⢠Batch File: tPad_Starter.bat, tPad_Starter_bashrc
⢠FPGA Configure File: tPad_Starter.sof
⢠Nios II Program: tPad_Starter.elf
 Demonstration Setup
⢠Make sure Quartus II and Nios II are installed on your PC
⢠Power on the DE2-115 board
⢠Connect USB-Blaster to the DE2-115 board and install USB-Blaster driver if necessary
⢠Execute the demo batch file âtPad_Starter.batâ under the batch file folder,
tPad_Starter\demo_batch
⢠After Nios II program is downloaded and executed successfully, a prompt message will be
displayed in nios2-terminal
⢠From on the touch panel, tap any icon of the main interface and start the experience, as shown
in Figure 4-4, Figure 4-5 and Figure 4-6
⢠Under each sub item, touch the Exit button on the left bottom corner will lead you back to the
main interface
21
|
▷ |