EV1340QI-E Datasheet, PDF (2/10 Pages) Altera Corporation – 40V, Low Quiescent Current, 50mA Linear Regulator

Page 2
Ordering Information
PART
NUMBER
PART
MARKING
TEMP. RANGE
(°C)
ENABLE
PIN
OUTPUT VOLTAGE
(V)
PACKAGE
(Pb-Free)
PKG.
DWG. #
EY1602SI-ADJ
1602AS
-40 to +125
Yes
Adjustable
8 Ld EPSOIC
M8.15B
(Notes 1)
EVB-EY1602SI-ADJ Evaluation Platform
NOTES:
1. Add “-T*” suffix for tape and reel.
2. These Altera Enpirion Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb
and Pb-free soldering operations). Altera Enpirion Pb-free products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Pin Configuration
EY1602SI-ADJ
(8 LD EPSOIC)
TOP VIEW
VIN 1
NC 2
NC 3
EN 4
PAD
(GND)
8 VOUT
7 VFB
6 NC
5 GND
Pin Descriptions
PIN NUMBER
1
2, 3, 6
4
5
7
8
-
PIN NAME
VIN
NC
EN
GND
VFB
VOUT
PAD
DESCRIPTION
Input voltage pin. A minimum 0.1µF X5R/X7R capacitor is required for proper operation. Range: 6V to 40V
Pins have internal termination and can be left not connected. Connection to ground is optional.
High on this pin enables the device. Range: 0V to V_IN
Ground pin.
This pin is connected to the external feedback resistor divider, which sets the LDO output voltage.Range: 0V to 3V
Regulated output voltage. A 10µF X5R/X7R output capacitor is required for stability. Range: 0V to 12V
It is recommended to solder the PAD to the ground plane.
EY1602 40V, Low Quiescent Current, 50mA Linear Regulator
09618
March 14, 2014
February 2014 Altera Corporation
Rev A