5CEBA2U19C8N Datasheet, PDF (10/58 Pages) Altera Corporation – Cyclone V Device Datasheet

Page 10
Electrical Characteristics
Table 10 lists the OCT variation with temperature and voltage after the power-up
calibration. The OCT variation is valid for a V_CCIO range of ±5% and a temperature
range of 0° to 85°C.
Table 10. OCT Variation after Power-Up Calibration for Cyclone V Devices
Symbol
Description
dR/dV
OCT variation with voltage without
recalibration
dR/dT
OCT variation with temperature
without recalibration
V_CCIO (V)
3.0
2.5
1.8
1.5
1.35
1.25
1.2
3.0
2.5
1.8
1.5
1.35
1.25
1.2
Typical
0.100
0.100
0.100
0.100
0.150
0.150
0.150
0.189
0.208
0.266
0.273
0.200
0.200
0.317
Unit
%/mV
%/°C
Pin Capacitance
Table 11 lists the Cyclone V device family pin capacitance.
Table 11. Pin Capacitance for Cyclone V Devices
Symbol
Description
Value Unit
C_IOTB
Input capacitance on top and bottom I/O pins
5.5
pF
C_IOLR
Input capacitance on left and right I/O pins
5.5
pF
C_OUTFB
Input capacitance on dual-purpose clock output and feedback pins 5.5
pF
Hot Socketing
Table 12 lists the hot socketing specifications for Cyclone V devices.
Table 12. Hot Socketing Specifications for Cyclone V Devices—Preliminary
Symbol
Description
Maximum
I_{IOPIN (DC)}
I_{IOPIN (AC)}
DC current per I/O pin
AC current per I/O pin
300 μA
8 mA ⁽¹⁾
I_{XCVR-TX (DC)}
DC current per transceiver transmitter (TX) pin
100 mA
I_{XCVR-RX (DC)}
DC current per transceiver receiver (RX) pin
50 mA
Note to Table 12:
(1) The I/O ramp rate is 10 ns or more. For ramp rates faster than 10 ns, |I_IOPIN| = C dv/dt, in which C is the I/O pin
capacitance and dv/dt is the slew rate.
Cyclone V Device Datasheet
June 2013 Altera Corporation